Energy-dispersive X-ray stress analysis under geometric constraints: exploiting the material's inherent anisotropy
Open Access
- 1 April 2023
- journal article
- research article
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 56 (2) , 526-538
Abstract
Two data evaluation concepts for X-ray stress analysis based on energy-dispersive diffraction on polycrystalline materials with cubic crystal structure, almost random crystallographic texture and strong single-crystal elastic anisotropy are subjected to comparative assessment. The aim is the study of the residual stress state in hard-to-reach measurement points, for which the sin2ψ method is not applicable due to beam shadowing at larger sample tilting. This makes the approaches attractive for stress analysis in engineering parts with complex shapes, for example. Both approaches are based on the assumption of a biaxial stress state within the irradiated sample volume. They exploit in different ways the elastic anisotropy of individual crystallites acting at the microscopic scale and the anisotropy imposed on the material by the near-surface stress state at the macroscopic scale. They therefore complement each other, in terms of both their preconditions and their results. The first approach is based on the evaluation of strain differences, which makes it less sensitive to variations in the strain-free lattice parameter a 0. Since it assumes a homogeneous stress state within the irradiated sample volume, it provides an average value of the in-plane stresses. The second approach exploits the sensitivity of the lattice strain to changes in a 0. Consequently, it assumes a homogeneous chemical composition but provides a stress profile within the information depth. Experimental examples from different fields in materials science, namely shot peening of austenitic steel and in situ stress analysis during welding, are presented to demonstrate the suitability of the proposed methods.Keywords
Funding Information
- Horizon 2020 Framework Programme (730872)
- DanScatt
- Deutsche Forschungsgemeinschaft (273371116)
This publication has 41 references indexed in Scilit:
- Quantitative estimation of incompatibility stresses and elastic energy stored in ferritic steelJournal of Applied Crystallography, 2008
- X-ray diffraction at constant penetration depth – a viable approach for characterizing steep residual stress gradientsJournal of Applied Crystallography, 2008
- Neutron and Synchrotron X‐ray Strain ScanningStrain, 2001
- Stress fields in the surface region of pearliteMaterials Science and Engineering: A, 1997
- Comparative measurement of residual stress in diamond coatings by low-incident-beam-angle-diffraction and micro-Raman spectroscopyJournal of Materials Research, 1996
- Impediments to Efficient Through-Surface Strain ScanningJournal of Neutron Research, 1996
- Characterization of thin nickel electrocoatings by the low-incident-beam-angle diffraction methodJournal of Applied Crystallography, 1994
- Evaluation of strongly non-linear surface-stress fields σxx(z) and σyy(z) from diffraction experimentsPhysica Status Solidi (a), 1989
- Berechnung der elastischen Konstanten des Vielkristalls aus den Konstanten des EinkristallsThe European Physical Journal A, 1958
- The Elastic Behaviour of a Crystalline AggregateProceedings of the Physical Society. Section A, 1952