Automatic Calibration of Odometry and Robot Extrinsic Parameters Using Multi-Composite-Targets for a Differential-Drive Robot with a Camera
Open Access
Abstract
This paper simultaneously calibrates odometry parameters and the relative pose between a monocular camera and a robot automatically. Most camera pose estimation methods use natural features or artificial landmark tools. However, there are mismatches and scale ambiguity for natural features; the large-scale precision landmark tool is also challenging to make. To solve these problems, we propose an automatic process to combine multiple composite targets, select keyframes, and estimate keyframe poses. The composite target consists of an aruco marker and a checkerboard pattern. First, an analytical method is applied to obtain initial values of all calibration parameters; prior knowledge of the calibration parameters is not required. Then, two optimization steps are used to refine the calibration parameters. Planar motion constraints of the camera are introduced in these optimizations. The proposed solution is automatic; manual selection of keyframes, initial values, and robot construction within a specific trajectory are not required. The competing accuracy and stability of the proposed method under different target placements and robot paths are tested experimentally. Positive effects on calibration accuracy and stability are obtained when (1) composite targets are adopted; (2) two optimization steps are used; (3) plane motion constraints are introduced; and (4) target numbers are increased.Keywords
This publication has 23 references indexed in Scilit:
- Constraint Gaussian Filter With Virtual Measurement for On-Line Camera-Odometry CalibrationIEEE Transactions on Robotics, 2018
- A New Localization System for Indoor Service Robots in Low Luminance and Slippery Indoor Environment Using Afocal Optical Flow Sensor Based Sensor FusionSensors, 2018
- Automatic Simultaneous Extrinsic-Odometric Calibration for Camera-Odometry SystemIEEE Sensors Journal, 2017
- Multi Sensor Fusion Framework for Indoor-Outdoor Localization of Limited Resource Mobile RobotsSensors, 2013
- State Estimation Based on the Concept of Continuous Symmetry and Observability Analysis: The Case of CalibrationIEEE Transactions on Robotics, 2011
- A non-iterative and effective procedure for simultaneous odometry and camera calibration for a differential drive mobile robot based on the singular value decompositionIntelligent Service Robotics, 2010
- Linear estimation of the physical odometric parameters for differential-drive mobile robotsAutonomous Robots, 2007
- Simultaneous localization and odometry self calibration for mobile robotAutonomous Robots, 2006
- Experimental results from internal odometry error correction with the OmniMate mobile robotIEEE Transactions on Robotics and Automation, 1998
- Measurement and correction of systematic odometry errors in mobile robotsIEEE Transactions on Robotics and Automation, 1996