Auxetic honeycombs with lossy polymeric infills for high damping structural materials
Authors:
- 20 March 2013
- journal article
- research article
- Published by SAGE Publications in Journal of Intelligent Material Systems and Structures
- Vol. 24 (9) , 1090-1104
Abstract
Structural grade materials with Young’s Modulus in the gigapascal range generally have very low damping, leading to requirement for auxiliary damping treatments in many applications. This article examines whether a high Young’s Modulus and damping level can simultaneously be realized by introducing lossy polymeric infills into auxetic aluminum honeycombs. Using finite element analysis, auxetic honeycombs with varying cell geometry and infill stiffness, loaded in the x- and y-directions, are examined. From the results, it is observed that the best performance is achieved when auxetic honeycombs with shallow inclined walls and short vertical walls are loaded in the x-direction. Young’s Modulus in excess of 10 GPa is achievable in combination with a loss factor of 5%. If a higher loss factor of 10% is required, Young’s Modulus in the range of 5.5–6.5 GPa can still be realized. The high loss factors achieved are attributed to the very high local strain levels in the polymeric infill in the central region of the cell between the top and the bottom cell walls, which are in close proximity, further increased by the large negative Poisson’s ratios of the configuration.Keywords
This publication has 10 references indexed in Scilit:
- Flexible Skins for Morphing Aircraft Using Cellular Honeycomb CoresJournal of Intelligent Material Systems and Structures, 2009
- Polymer Filled Honeycombs to Achieve a Structural Material with Appreciable Damping2009
- Auxetic materialsProceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 2007
- Mechanical Behavior of Rubberfilled Multifunctional Honeycomb Sandwich Composite2005
- Basic mechanical properties of balloon-type TEEK-L polyimide-foam and TEEK-L filled aramid-honeycomb core materials for sandwich structuresAdvanced Composite Materials, 2005
- Field vibration mitigation by honeycomb WIB for pile foundations of a high-speed train viaductSoil Dynamics and Earthquake Engineering, 2004
- Impact Damage of Partially Foam-filled Co-injected Honeycomb Core Sandwich CompositesJournal of Composite Materials, 2003
- Damping modelization of auxetic foams2000
- Viscoelastic behaviour of composite materials with conventional- or negative-Poisson's-ratio foam as one phaseJournal of Materials Science, 1993
- A theoretical approach to the deformation of honeycomb based composite materialsComposites, 1979