Anhydrides-Cured Bimodal Rubber-Like Epoxy Asphalt Composites: From Thermosetting to Quasi-Thermosetting
Open Access
Abstract
The present engineering practices show the potential that epoxy asphalt composites (EACs) would be a better choice to obtain long life for busy roads. To understand the service performance–related thermorheological properties of prepared bimodal anhydrides-cured rubber-like EACs (REACs), a direct tensile tester, dynamic shear rheometer and mathematical model were used. Tensile tests demonstrate that all the REACs reported here are more flexible than previously reported anhydrides-cured REACs at both 20 and 0 °C. The better flexibility is attributed to the change of bimodal networks, in which cross-linked short chains decreased and cross-linked long chains increased, relatively. Strain sweeps show that all the REACs have linear viscoelastic (LVE) properties when their strains are smaller than 1.0% from −35 to 120 °C. Temperature sweeps illustrate that the thermorheological properties of REACs evolve from thermosetting to quasi-thermosetting with asphalt content, and all the REACs retain solid state and show elastic properties in the experimental temperature range. A Cole–Cole plot and Black diagram indicate that all the REACs are thermorheologically simple materials, and the master curves were constructed and well-fitted by the Generalized Logistic Sigmoidal models. This research provides a facile approach to tune the thermorheological properties of the REACs, and the cheaper quasi-thermosetting REAC facilitates their advanced applications.Keywords
Funding Information
- National Natural Science Foundation of China (51308461)
- the Fundamental Research Funds for the Central Universities (2452015054, 2452015375)
This publication has 22 references indexed in Scilit:
- Rubber-like Quasi-thermosetting Polyetheramine-cured Epoxy Asphalt Composites Capable of Being Opened to Traffic ImmediatelyScientific Reports, 2016
- Thermo-rheological behavior and compatibility of modified asphalt with various styrene–butadiene structures in SBS copolymersMaterials & Design, 2015
- Polymer modified bitumen: Optimization and selectionMaterials & Design (1980-2015), 2014
- A review of using waste and virgin polymer in pavementConstruction and Building Materials, 2012
- Rubber‐like thermosetting epoxy asphalt composites exhibiting atypical yielding behaviorsJournal of Applied Polymer Science, 2010
- The colloidal structure of bitumen: Consequences on the rheology and on the mechanisms of bitumen modificationAdvances in Colloid and Interface Science, 2009
- Epoxy Modified Open-graded Porous AsphaltRoad Materials and Pavement Design, 2008
- Polymer modified asphalt bindersConstruction and Building Materials, 2007
- Relation between polymer architecture and nonlinear viscoelastic behavior of modified asphaltsCurrent Opinion in Colloid & Interface Science, 2006
- Epoxy asphalt concrete paving on the deck of long-span steel bridgesChinese Science Bulletin, 2003