Influence of baffle position on liquid sloshing during braking and turning of a tank truck
Authors:
- 1 May 2010
- journal article
- Published by Zhejiang University Press in Journal of Zhejiang University-SCIENCE A
- Vol. 11 (5) , 317-324
Abstract
The influence of baffle position on liquid sloshing during the braking and turning of a tank truck was studied using a volume of fluid (VOF) model. The forces, their positions and weight distribution during braking and the forces and rolling moment during turning were calculated. The reliability of the calculation method was validated by comparisons with experimental results. The results showed that during braking, liquid splashes in the tank and the maximum forces and G (the ratio of weight acting on the front axle to the rear axle) are large when A (the ratio of the arch area above the baffle to the area of cross section)≤0.1. When A≥0.2, as the position of the baffle is lowered, the maximum of F x (the force in direction x) first decreases then increases, and the maximum of F y (the force in direction y) and G increase. During turning, liquid splashes in the tank and the maximum forces and M (the rolling moment) are large when D (the ratio of the arch area above the baffle to the area of cross section)≤0.2. When D≥0.3, as the position of the baffle is lowered, the maximums of F y , F z (the force in direction z) and M increase.Keywords
This publication has 11 references indexed in Scilit:
- Liquid sloshing in half-full horizontal elliptical tanksJournal of Sound and Vibration, 2009
- Experimental studies on sloshing behavior due to horizontal movement of liquids in baffled tanksOcean Engineering, 2009
- Effect of baffles on a partially filled cubic tank: Numerical simulation and experimental validationComputers & Structures, 2009
- Three-dimensional liquid sloshing in a tank with bafflesOcean Engineering, 2009
- Sloshing damping in cylindrical liquid storage tanks with bafflesJournal of Sound and Vibration, 2008
- Natural sloshing frequencies of liquid cargo in road tankersInternational Journal of Heavy Vehicle Systems, 2005
- Numerical study on liquid sloshing in baffled tank by nonlinear finite element methodComputer Methods in Applied Mechanics and Engineering, 2004
- Evaluation of sloshing problem by variational boundary element methodEngineering Analysis with Boundary Elements, 2003
- A spurious free four-node displacement-based fluid element for fluid-structure interaction analysisEngineering Structures, 1997
- On the analysis of sloshing of water in rectangular containers: Numerical study and experimental validationOcean Engineering, 1996