Study of a six‐bed pressure swing adsorption process
Authors:
- 1 October 1997
- journal article
- separation
- Published by Wiley in AIChE Journal
- Vol. 43 (10) , 2509-2523
Abstract
A mathematical model of a six‐bed, ten‐step PSA operation is developed. The process cycle considered resembles an industrial hydrogen recovery process from the refinery fuel gas. Three hydrocarbon impurities (methane, ethane, and propane) are considered in the feed gas. The adsorbent used is activated carbon. The nonisothenmal, bulk separation PSA model adopts the linear driving force approximation for particle uptake and the extended Langmuir isotherm to represent adsorption equilibrium. A transient pressure equation is incorporated to account for the dynamics in uariable pressure steps. The model was verified using experimental results from a computer‐controlled, laboratory‐scale PSA unit. Considering the complexity of operation, comparison of various stream flow rates, concentrations, bed pressure and temperature profiles indicates that the model provides a sufficiently accurate prediction of the PSA performance. Parametric studies further show that its product purity declines relatively quickly with increasing cycle time and decreasing high operating pressure due to the breakthrough of a relatively sharp methane front. There is no real advantage in operating the PSA unit beyond a high operating pressure of about 18.0 bar.Keywords
This publication has 13 references indexed in Scilit:
- Kinetics of hydrocarbon adsorption on activated carbon and silica gelAIChE Journal, 1997
- A method to obtain a compact representation of process performances from a numerical simulator: example of pressure swing adsorption for pure hydrogen productionGas Separation & Purification, 1995
- Experimental study on a four‐bed PSA air separation processAIChE Journal, 1994
- Pressure Swing Adsorption Process: Performance Optimum and Adsorbent SelectionIndustrial & Engineering Chemistry Research, 1994
- Simulation of a Four-Bed Pressure Swing Adsorption Process for Oxygen EnrichmentIndustrial & Engineering Chemistry Research, 1994
- Gas Mixture Fractionation to Produce Two High Purity Products by Pressure Swing AdsorptionSeparation Science and Technology, 1992
- Separation of Gases by Pressure SwinSeparation Science and Technology, 1991
- Numerical simulation of a fixed‐bed adsorption column by the method of orthogonal collocationAIChE Journal, 1983
- Studies on axial effective thermal conductivities in packed bedsAIChE Journal, 1960
- Heat transfer characteristics of porous rocksAIChE Journal, 1960