Application of the Composite Hardness Models in the Analysis of Mechanical Characteristics of Electrolytically Deposited Copper Coatings: The Effect of the Type of Substrate
Open Access
Abstract
The mechanical characteristics of electrochemically deposited copper coatings have been examined by application of two hardness composite models: the Chicot-Lesage (C-L) and the Cheng-Gao (C-G) models. The 10, 20, 40 and 60 µm thick fine-grained Cu coatings were electrodeposited on the brass by the regime of pulsating current (PC) at an average current density of 50 mA cm−2, and were characterized by scanning electron (SEM), atomic force (AFM) and optical (OM) microscopes. By application of the C-L model we determined a limiting relative indentation depth (RID) value that separates the area of the coating hardness from that with a strong effect of the substrate on the measured composite hardness. The coating hardness values in the 0.9418–1.1399 GPa range, obtained by the C-G model, confirmed the assumption that the Cu coatings on the brass belongs to the “soft film on hard substrate” composite hardness system. The obtained stress exponents in the 4.35–7.69 range at an applied load of 0.49 N indicated that the dominant creep mechanism is the dislocation creep and the dislocation climb. The obtained mechanical characteristics were compared with those recently obtained on the Si(111) substrate, and the effects of substrate characteristics such as hardness and roughness on the mechanical characteristics of the electrodeposited Cu coatings were discussed and explained.Keywords
This publication has 47 references indexed in Scilit:
- Effect of Molecular Weight of Polyethylene Glycol on Copper Electrodeposition in the Presence of Bis-3-Sulfopropyl-DisulfideInternational Journal of Electrochemical Science, 2016
- Electrochemical deposition of layered copper thin films based on the diffusion limited aggregationScientific Reports, 2016
- Morphology of Electrochemically and Chemically Deposited Metals2016
- On the pressure effect in energetic deposition of Cu thin films by modulated pulsed power magnetron sputtering: A global plasma model and experimentsJournal of Applied Physics, 2015
- Preliminary Investigation on Brazing Performance of Ti/Ti and Ti/Steel Joints Using Copper Film Deposited by PVD TechniqueJournal of Materials Engineering and Performance, 2012
- Influence of the interaction between chloride and thiourea on copper electrodepositionElectrochimica Acta, 2009
- Advanced copper electroplating for application of electronicsSurface and Coatings Technology, 2003
- Development of 〈110〉 texture in copper thin filmsApplied Physics Letters, 2002
- The Preferred Orientation of Bright Copper DepositsMaterials Science Forum, 2000
- Physical and Spectroscopic Studies of the Nucleation and Growth of Copper Thin Films on Polyimide Surfaces by Chemical Vapor DepositionLangmuir, 1995