Effects of joint heat distribution on material flow and microstructure in continuous drive friction welding of 45 # steel
- 1 March 2022
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 236 (12) , 6635-6651
Abstract
Continuous drive friction welding (CDFW) is an economical and productive method for joining similar metals. In this study, 45 # steel was joined via CDFW, and the material heat distribution, flow behaviour, flash formation and fracture mode were investigated via experiments and simulations. The bar was divided into three zones in the direction of radius (R), the R zone near the axis, the edge zone at the edge of the R and the 0.5 R zone between the R zone and edge zone. The maximum flow velocity and temperature of the joint first appeared in the 0.5 R zone, and as the friction continued, the maximum temperature moved to the edge zone, followed by flash. When the friction time was 9 s, the maximum tensile strength was 674 MPa, the fracture mode was the coexistence of ductile and brittle and the fracture location had an obvious boundary. Ductile fracture occurred in the R zone, and the flash took a lot of heat, brittle fracture occurred in the 0.5 R and edge zones. The maximum microhardness of the joint is 295 HV in the weld zone, and the microhardness decreased in the partially deformed zone. When the friction time was appropriate, the heat distribution was uniform and sufficient, and the grains exhibited a significant degree of dynamic recrystallisation refinement.Keywords
Funding Information
- Ganzhou Science and Technology Project
- Jiangxi Provincial Natural Science Foundation Project (20171BAB216033)
- Jiangxi Provincial Department of Education Science and Technology Research Project (GJJ170501)
- Ganzhou Science and Technology Plan Project Science and Technology Innovation Talent Program
- Jiangxi University of Science and Technology Ph.D. Foundation Funded Project (JXXJBS16001)
This publication has 43 references indexed in Scilit:
- Friction stir modification of GTA 7075-T6 Al alloy weld joints: EBSD study and microstructural evolutionsArchives of Civil and Mechanical Engineering, 2017
- Assessment of microstructure and tensile behavior of continuous drive friction welded titanium tubesMaterials Science and Engineering: A, 2017
- Continuous drive friction welding of 5A33 Al alloy to AZ31B Mg alloyJournal of Manufacturing Processes, 2017
- Friction welding of a nickel free high nitrogen steel: influence of forge force on microstructure, mechanical properties and pitting corrosion resistanceJournal of Materials Research and Technology, 2014
- 3D numerical analysis of material flow behavior and flash formation of 45# steel in continuous drive friction weldingTransactions of Nonferrous Metals Society of China, 2012
- Effect of QPQ nitriding time on wear and corrosion behavior of 45 carbon steelApplied Surface Science, 2012
- Robot Stereo Vision Calibration Based on Hybrid Swarm Intelligent OptimizationJournal of Mechanical Engineering, 2012
- Influence of hot working on microstructure and mechanical behavior of high nitrogen stainless steelJournal of Materials Science, 2011
- Optimization of the friction-stir-welding process and tool parameters to attain a maximum tensile strength of AA7075–T6 aluminium alloyProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2010
- Effect of friction welding parameters on mechanical and metallurgical properties of ferritic stainless steelThe International Journal of Advanced Manufacturing Technology, 2006