Investigation on surface morphology and tribological property generated by vibration assisted strengthening on aviation spherical plain bearings
Authors:
- 13 July 2018
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 233 (12) , 4091-4101
Abstract
The extreme and complex working conditions require aviation spherical plain bearings not only to have high machining accuracy and low surface roughness, but also to possess high surface microhardness and lubricant retaining capability. This paper presents a vibration assisted strengthening approach to achieving the synergistic effects of the surface property-improving and appearance-improving. The research attempts to answer how vibration assisted strengthening technique can improve the surface tribological properties of aviation spherical plain bearing components particularly in light of proposing the flat-headed asperity distribution model and the corresponding elastic–plastic contact modelling for the special processed surface morphology. Subsequently, the models are corroborated by the experimental results of characterizing the surface morphology produced by vibration assisted strengthening with different parameters such as rolling times and rolling static force. The surface tribological properties of spherical plain bearing specimens were studied by employing the UMT-TriboLab platform. The theoretical analysis and experimental results indicate that the surface asperities of spherical plain bearing components processed with repeated high frequency strikes present a flat-headed distribution but not Gauss distribution. It characterizes with a marked majority of produced small asperities with similar height, which is beneficial to frictional couple contacts and a lot of original valleys retaining lubricants. The processing technique contributes to increasing the surface microhardness by 20% and decreasing the surface roughness from about Ra 0.4 µm to below Ra 0.1 µm. The ball-on-flat friction tests demonstrate that both the special flat-headed surface structure and the elevated microhardness can attribute the improvement of tribological properties and wear resistance performance of spherical plain bearings.Keywords
Funding Information
- Basic Research Foundation of Liaoning Province Universities (LFGD2017007)
- Natural Science Foundation of Shenyang Municipality (F16-205-1-10)
- China Postdoctoral Science Foundation (2014M551124)
- National Natural Science Foundation of China (51305278)
- program of China Scholarships Council (201708210034)
This publication has 20 references indexed in Scilit:
- Comparison of mechanisms of advanced mechanical surface treatments in nickel-based superalloyMaterials Science and Engineering: A, 2013
- Modeling of the carburizing and nitriding processesComputational Materials Science, 2009
- Investigations on the nanocrystallization of 40Cr using ultrasonic surface rolling processingApplied Surface Science, 2008
- Contact mechanics for randomly rough surfacesSurface Science Reports, 2006
- Surface material design of 316 stainless steel by combination of low temperature carburizing and nitridingSurface and Coatings Technology, 2005
- Measurement and Modeling of Normal Contact Stiffness and Contact Damping at the Meso ScaleJournal of Vibration and Acoustics, 2005
- A theory of pad conditioning for chemical-mechanical polishingJournal of Engineering Mathematics, 2004
- High Temperature Oxidation Resistant Coatings Produced by Electro-Spark DepositionMaterials Science Forum, 2001
- The prediction of friction and wear when a soft surface slides against a harder rough surfaceWear, 1996
- Contact of nominally flat surfacesProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1966