Comparison of the efficiency of the high speed low torque hydrostatic drives using bent axis motor: An experimental study
Authors:
- 11 December 2015
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
- Vol. 231 (4) , 650-666
Abstract
This article is aimed at analysing the steady-state performance of four hydrostatic drives and compares their overall efficiency. The speed of the hydrostatic drives is controlled by speed controlled vane pump, variable displacement flow compensated pump, variable displacement pressure compensated pump and proportional direction controlled valve. Bondgraph simulation technique is used to model the hydrostatic drive. The relationships of the loss coefficients with the state variables obtained from the model are identified through experimental investigation. Using them, at different torque levels, the performances of the hydrostatic drives are studied on their slips, torque losses and the overall efficiencies and they are validated experimentally. It is found that hydrostatic drive using speed controlled vane pump exhibits the maximum efficiency, whereas the poorest efficiency is shown by the valve controlled system out of the four drives considered in the analysis.Keywords
This publication has 7 references indexed in Scilit:
- Flow versus pressure control of pumps in mobile hydraulic systemsProceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 2013
- Control strategy of hydraulic/electric synergy system in heavy hybrid vehiclesEnergy Conversion and Management, 2011
- Theoretical and experimental studies on the steady-state performance of low-speed high-torque hydrostatic drives. Part 2: Experimental investigationProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2009
- Theoretical and experimental studies on the steady-state performance of low-speed high-torque hydrostatic drives. Part 1: ModellingProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2009
- Electric-hydrostatic drive—an innovative energy-saving power and motion control systemProceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 1999
- Systematic approach to the control of hydrostatic drivesProceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 1999
- Intelligent control of an electrohydraulic motor drive systemMechatronics, 1995