Multiscale Progressive Failure Analysis for Composite Stringers Subjected to Compressive Load
Open Access
Abstract
The fiber-reinforced composite stringer is commonly used in large civil aircraft wing structures. Under compression loads, it exhibits complex failure modes, with matrix cracking being one of the most common. The quantitative analysis of matrix failure is important and difficult. To address this issue, a multiscale method combining the generalized method of cells (GMC) and macroscopic FEM models is employed to quantitatively predict matrix damage and failure. The extent of matrix damage in the composite structure is represented by the number of failed matrix subcells within the repeating unit cells. The 3D Tsai–Hill failure criterion is established for the matrix phase, and the maximum stress failure criterion is applied to the fiber subcell. Upon meeting the criterion, the stiffnesses of the failed subcells are immediately reduced to a nominal value. In the current study, the ultimate loads, failure modes and load–displacement curves of composite stringers subjected to compressive load are obtained by the experiment approach and the proposed multiscale model. The experimental and simulation results show good agreement, and the multiscale analysis method successfully predicts the extent of matrix damage in the composite stringer under compressive load. The number of failed matrix subcells quantitatively evaluates the damage extent within a 2 × 2 GMC model. The findings reveal that matrix subcell failures primarily occur in the 45° and −45° plies of the middle part of the stringer composite.Keywords
Funding Information
- Fundamental Research Funds for the Central Universities (PHD2023-013, CAIACDRCXM2024-03)
- Research Center for Chengdu Aviation Industry Development and Cultural Construction (PHD2023-013, CAIACDRCXM2024-03)
This publication has 29 references indexed in Scilit:
- Skin-stringer interface failure investigation of stringer-stiffened curved composite panels under hail ice impactInternational Journal of Impact Engineering, 2018
- Efficient progressive failure analysis of multi-stringer stiffened composite panels through a two-way loose coupling global-local approachComposite Structures, 2018
- Multiscale model of woven ceramic matrix composites considering manufacturing induced damageComposite Structures, 2015
- Modeling carbon nanotube reinforced composite materials with the cylindrical method of cellsInternational Journal for Numerical Methods in Engineering, 2015
- A new viscoelastic model based on generalized method of cells for fiber-reinforced compositesInternational Journal of Plasticity, 2015
- The method of cells and the mechanical properties of textile compositesComposite Structures, 2011
- Calculation of the collapse load of an axially compressed laminated composite stringer-stiffened curved panel–An engineering approachComposite Structures, 2008
- An efficient implementation of the generalized method of cells for unidirectional, multi-phased composites with complex microstructuresComposites Part B: Engineering, 1999
- Micromechanical analysis of composites by the generalized cells modelMechanics of Materials, 1992
- Failure Criteria for Unidirectional Fiber CompositesJournal of Applied Mechanics, 1980