Thermal–Solid Interaction Study of Serpentine Nozzle and Analysis on Structural Response Law
Authors:
Open Access
- 1 December 2023
- journal article
- research article
- Published by Academic World Research in Journal of Applied Fluid Mechanics
- Vol. 16 (12) , 2438-2458
Abstract
The serpentine nozzle effectively suppresses infrared radiation and radar signals from advanced aero-engine exhaust system. However, the extreme operating environment of thermal–solid interaction complicates the heat transfer of the flow inside the serpentine nozzle and the structural response of the nozzle itself. In this study, the internal flow heat transfer and the structural response of the serpentine nozzle were investigated numerically. Further, the parameter influence law of wall thickness was explored. The results show that the mechanism of the thermal-solid interaction is formed through the data transfer of the heat flux and the temperature at the interface between the flow field and structure field. The heat flux distribution of the nozzle under the bending configuration is non-uniform. The upper wall surface at the first bend and the lower wall surface at the second bend exhibit the highest heat flux. In the structural response, the temperature extremes appear on the upper wall at the first bend and the lower wall at the second bend. Subsequently, they shift to the inlet. The stress in the nozzle with a thickness of 3 mm first increases and then decreases, with a maximum stress of 139.43 MPa at t = 51.20 s. For nozzles of different thicknesses, the positions of the maximum stresses all appear at the outlet and the moments concentrate in approximately 50 s. However, with the increase in thickness, the maximum stress of nozzle increases continuously, and the maximum increases by 93% compared with the minimum.Keywords
This publication has 25 references indexed in Scilit:
- Investigation on influence mechanism of length-to-diameter ratio on fluid-structure interaction characteristic of serpentine nozzleJournal of Physics: Conference Series, 2024
- Analysis of Plume Infrared Signatures of S-Shaped Nozzle Configurations of Aerial VehicleJournal of Aircraft, 2016
- Fluid–Thermal Interaction Investigation of Spiked Blunt Bodies at Hypersonic Flight ConditionJournal of Spacecraft and Rockets, 2016
- Consequences of Material Addition for a Beam Strip in a Thermal EnvironmentAIAA Journal, 2009
- Ten years in the making - AUSM-family2001
- An experimental comparison of nonswirling and swirling flow in a circular-to-rectangular transition duct1991
- Flow-thermal-structural study of aerodynamically heated leading edgesJournal of Spacecraft and Rockets, 1989
- An experimental study of flow in a circular-rectangular transition duct1988
- Subsonic diffuser design and performance for advanced fighter aircraft1985
- Shock-wave shapes around spherical-and cylindrical-nosed bodies.Journal of Spacecraft and Rockets, 1967