An LQR Approach of Automatic Transmission Upshift Control Including Use of Off-Going Clutch within Inertia Phase
Authors:
- Ivan CvokICIvan Cvok
- Josko DeurJDJosko Deur
- Vladimir IvanovicVIVladimir Ivanovic
- Yijing ZhangYZYijing Zhang
- Yuji FujiiYFYuji Fujii
- 14 April 2020
- journal article
- research article
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 2 (4) , 2081-2091
Abstract
This paper considers using linear quadratic regulation (LQR) for multi-input control of the Automatic Transmission (AT) upshift inertia phase. The considered control inputs include the transmission input/engine torque, oncoming clutch torque, and traditionally not used off-going clutch torque. Use of the off-going clutch has been motivated by discussed Control Trajectory Optimization (CTO) results demonstrating that employing the off-going clutch during the inertia phase along with the main, oncoming clutch can improve the upshift control performance in terms of the shift duration and/or comfort by trading off the transmission efficiency and control simplicity to some extent. The proposed LQR approach provides setting an optimal trade-off between the conflicting criteria related to driving comfort and clutches thermal energy loss. It ensures tracking a linear-like profile of oncoming clutch slip speed reference, which was found to be nearly optimal based on control trajectory optimization results. A special attention is given on proper implementation of nonlinear energy loss term through LQR cost function cross term and using a clipped optimal control approach to provide that the clutches (described as torque source elements) can only dissipate energy. The LQR approach was applied to a fifth-order powertrain model and different upshift control scenarios ranging from the use of single clutch towards using both clutches and transmission input/engine torque reduction. It is shown that the LQR approach can reproduce Pareto frontiers obtained by multi-objective control parameter optimization demonstrating that apart from being used in closed loop controls, the proposed LQR approach can also be exploited for computationally efficient (off-line) optimization purposes.Keywords
This publication has 19 references indexed in Scilit:
- Multi-objective parameter optimization of control profiles for automatic transmission double-transition shiftsControl Engineering Practice, 2019
- Optimization-based assessment of automatic transmission double-transition shift controlsControl Engineering Practice, 2018
- Automatic Transmission Shift Control for Canceling Inertia TorqueSAE International Journal of Advances and Current Practices in Mobility, 2018
- Improved clutch slip control for automated transmissionsProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2017
- Optimization of Shift Control Trajectories for Step Gear Automatic TransmissionsJournal of Dynamic Systems, Measurement, and Control, 2017
- Bond Graph Analysis of Automatic Transmission Shifts including Potential of Extra Clutch ControlSAE International Journal of Engines, 2016
- Automatic Transmission Systems Beyond 2020 - Challenges and CompetitionSAE International Journal of Advances and Current Practices in Mobility, 2013
- Dynamic Analysis and Control System Design of Automatic Transmissions2013
- Design of a robust controller for shift control of an automatic transmissionProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2012
- Outline of a new control concept for power shifting of fixed step ratio automotive transmissionsProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2001