Structural and Mechanical Properties of TiN-TiC-TiO System: First Principle Study*
- 1 November 2017
- journal article
- research article
- Published by IOP Publishing in Communications in Theoretical Physics
- Vol. 68 (5) , 678-686
Abstract
Mechanical and structural properties of ternary system of TiN-TiO-TiC are investigated using first principle methods. 70 different compositions of Ti 100 (NOC) 100 with cubic structure are examined in order to illustrate the trend of properties variations. The geometry of compounds is optimized, and then, their chemical stability is assessed. Afterward, shear, bulk and young moduli, Cauchy pressure, Zener ratio, hardness and H 3 / E 2 ratio are computed based on elastic constants. Graphical ternary diagram is used to represent the trend of such properties when the content of nitrogen, oxygen and carbon varies. The results show that incorporation of oxygen into the system decreases the hardness and H 3 / E 2 ratio while subsequently ductility increases due to positive Cauchy pressure. It is revealed that the maximum H 3 / E 2 ratio occurs when both nitrogen and carbon with a little amount of oxygen are incorporated. Ti 100 N 30 C 70 owns the highest hardness and H 3 / E 2 ratio equal to 39.5 and 0.2 GPa, respectively. In addition, the G/B of this compound, which is about 0.9, shows it is brittle. It is also observed that the solid solutions have better mechanical properties with respect to titanium nitride and titanium carbide. The obtained results could be used to enhance monolayer coatings as well as to design multilayers with specific mechanical properties.Keywords
This publication has 63 references indexed in Scilit:
- Erosion wear of CrN, TiN, CrAlN, and TiAlN PVD nitride coatingsInternational Journal of Refractory Metals and Hard Materials, 2012
- Microscopic theory of hardness and design of novel superhard crystalsInternational Journal of Refractory Metals and Hard Materials, 2012
- Impact of residual stress on the adhesion and tensile fracture of TiN/CrN multi-layered coatings from first principlesPhysica E: Low-dimensional Systems and Nanostructures, 2012
- Population analysis solution to hardness enhancement in TiCxN1−xPhysica B: Condensed Matter, 2012
- Stability of (Ti, M)C (M = Nb, V, Mo and W) carbide in steels using first-principles calculationsActa Materialia, 2012
- Erosion-resistant coatings for gas turbine compressor bladesRussian Metallurgy (Metally), 2009
- Microstructure modification of TiN by ion bombardment during reactive sputter depositionThin Solid Films, 1989
- The single-crystal elastic constants of cubic (3C) SiC to 1000 CJournal of Materials Science, 1987
- Ground State of the Electron Gas by a Stochastic MethodPhysical Review Letters, 1980
- Die Konstitution der Mischkristalle und die Raumf llung der AtomeThe European Physical Journal A, 1921