Evaluating Water Damage in Acrylic Polymer–Modified Cold Bituminous Emulsion Mixtures
Authors:
- 1 December 2021
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 33 (12) , 04021337
Abstract
Currently, there is a global increase in the use of sustainable technologies in the construction of pavement systems. Cold bituminous emulsion mixture (CBEM) is a promising alternative to hot mix asphalt (HMA) that offers economic, environmental, and energy-saving advantages. However, CBEMs have high water content because of the requirement for prewetting water, in addition to water within the bitumen emulsion. This additional water content causes low early strength and reduces resistance to water damage. To address this, the current study aims to evaluate the influence of water on CBEMs which have been modified with ordinary portland cement (OPC) and an acrylic (AR) polymer, evaluating them in comparison with HMAs. Marshall stability and durability, assessed by means of water damage tests, will thus be used to evaluate the influence of water content for each mix. The acrylic polymer was incorporated into the bitumen emulsion prior to the preparation of CBEMs at various percentages ranging from 0% to 5% of residual bitumen weight. The results indicate that the introduction of OPC and AR generally improves water damage resistance. The CBEM with a mix of OPC and 1.25% AR gave the best performance, showing a 12% increase in resistance compared with HMA with conventional mineral filler (CMF) and a striking 109% increase in resistance compared with CBEM with OPC only.Keywords
This publication has 20 references indexed in Scilit:
- Influence of Styrene-Acrylic Ester Dispersion on the Early Hydration of CementAdvances in Materials Science and Engineering, 2014
- Mechanical Properties of an Upgrading Cold-Mix Asphalt Using Waste MaterialsJournal of Materials in Civil Engineering, 2012
- A comparative study for improving the mechanical properties of cold bituminous emulsion mixtures with cement and waste materialsConstruction and Building Materials, 2012
- Moisture damage potential of cold asphaltInternational Journal of Pavement Engineering, 2009
- Estimation of resistance to moisture destruction in asphalt mixturesConstruction and Building Materials, 2009
- Effect of Portland cement and lime additives on properties of cold in-place recycled mixtures with asphalt emulsionConstruction and Building Materials, 2009
- Effect of Cement on Emulsified Asphalt MixturesJournal of Materials Engineering and Performance, 2007
- Polymer modified asphalt bindersConstruction and Building Materials, 2007
- Rutting and Moisture Resistance of Asphalt Mixtures Containing Polymer and Polyphosphoric Acid Modified BitumenRoad Materials and Pavement Design, 2004
- Physical and Chemical Characteristics of Blast Furnace, Basic Oxygen Furnace, and Electric Arc Furnace Steel Industry SlagsEnvironmental Science & Technology, 2000