Experimental Study on the Bond-Slip Behavior of Steel-Steel Fiber Recycled Aggregate Concrete
Open Access
Abstract
To study the bond–slip behavior of steel–steel fiber recycled aggregate concrete, push-out tests of 16 specimens were carried out using steel fiber volume ratio, steel fiber aspect ratio, steel protective layer thickness and steel embedded length as the design parameters. In addition, the crack patterns, steel strain distribution, and load–slip curves were studied, in addition to the bond strengths of the interface between the steel–steel fiber and recycled aggregate concrete. The results showed that the fracture cracks of the specimens mainly included bond cracks and expansion cracks. For the load increase stage, the maximum strain of the steel flange was near the loading end of the steel and decreased toward the free end, while the strain changed linearly for the load descending stage. The bond–slip process between the steel–steel fiber and recycled aggregate concrete included five stages, which consisted of slight-slip, slow-slip, accelerated-slip, the sharp-slip and load-steep-drop stage, and gentle-slip stage. Additionally, the influencing factors of bond strength were analyzed, where the bond strength increased first and then decreased with increasing steel fiber volume and steel fiber aspect ratios, and the bond strength increased with increasing steel protective layer thickness. The ultimate bond strength decreased slightly with increasing steel embedded length. Finally, the equation for calculating the characteristic bond strength of the steel–steel fiber recycled aggregate concrete was established, which showed that the calculation results were in good agreement with the test results.Keywords
Funding Information
- National Natural Science Foundation of China (No. 51608435, 51878547 and 52178163)
This publication has 12 references indexed in Scilit:
- Deterioration of an industrial reinforced concrete structure exposed to high temperatures and dry-wet cyclesEngineering Failure Analysis, 2022
- Compressive strength of concrete with recycled aggregate; a machine learning-based evaluationCleaner Materials, 2022
- Improving anti-progressive collapse capacity of welded connection based on energy dissipation cover-platesJournal of Constructional Steel Research, 2022
- Damage behaviors, prediction methods and prevention methods of rockburst in 13 deep traffic tunnels in ChinaEngineering Failure Analysis, 2021
- Probability distribution model of stress impact factor for corrosion pits of high-strength prestressing wiresEngineering Structures, 2021
- Effects of waterproofing admixture on the compressive strength and permeability of recycled aggregate concreteJournal of Building Engineering, 2020
- Better understanding the failure modes of tunnels excavated in the boulder-cobble mixed strata by distinct element methodEngineering Failure Analysis, 2020
- Influence of bonded mortar of recycled concrete aggregates on interfacial characteristics – Porosity assessment based on pore segmentation from backscattered electron image analysisConstruction and Building Materials, 2019
- Steam-cured recycled aggregate concrete incorporating moderately high early strength cement: effect of binder content and curing conditionsSN Applied Sciences, 2019
- Properties enhancement of recycled aggregate concrete through pretreatment of coarse aggregates – Comparative assessment of assorted techniquesJournal of Cleaner Production, 2018