Reactive bonding of natural rubber to metal by a nitrile–phenolic adhesive
Authors:
- P. Sasidharan AcharyPAP. Sasidharan Achary
- C. GouriCGC. Gouri
- R. RamaswamyRRR. Ramaswamy
- 19 June 2001
- journal article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 81 (11) , 2597-2608
Abstract
The mechanism of adhesive bonding of rubber to metal using an interlayer of bonding agent (adhesive) is discussed with respect to various physical and chemical events such as adsorption at the metal surface, chemical crosslinking within the adhesive, interdiffusion, and formation of interpenetrating networks at the rubber–adhesive interface. An investigation on the peel strength of a natural rubber (NR)–adhesive–metal joint, made by vulcanization bonding using nitrile–phenolic adhesive containing various concentrations of toluene diisocyanate–nitrosophenol (TDI–NOP) adduct, is presented. A single‐coat adhesive, consisting of a p‐cresol phenol formaldehyde resin, nitrile rubber (NBR), and vulcanizing agents in methyl ethyl ketone solvent, was selected for the study. Considerable improvement in the peel strength was obtained by the incorporation of TDI–NOP adduct into the nitrile–phenolic adhesive. The peel strength increases as the concentration of TDI–NOP adduct in the adhesive composition increases, then levels off with a transition from interfacial failure to cohesive tearing of rubber. The peel strength improvement is believed to be attributed to the interfacial reactions between the bonding agent and natural rubber, when TDI–NOP adduct is incorporated. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2597–2608, 2001Keywords
This publication has 13 references indexed in Scilit:
- Reactive polymers for blend compatibilizationAdvances in Polymer Technology, 1992
- Compatibilization of polymer blends by reactive processingPolymer Engineering & Science, 1991
- The Mechanism of Phenolic Resin Vulcanization of Unsaturated ElastomersRubber Chemistry and Technology, 1989
- Cure Adhesion in the Interface of Fluorinated and Nitrile RubbersRubber Chemistry and Technology, 1987
- Molecular design of multicomponent polymer systems. XII. Direct observation of the location of a block copolymer in low-density polyethylene-polystyrene blendsJournal of Polymer Science Part C: Polymer Letters, 1986
- Some aspects of chemistry in adhesion on anodized aluminiumInternational Journal of Adhesion and Adhesives, 1985
- Effect of a Phenol Formaldehyde Resin of the Adhesion of a Polysulfide Sealant1984
- Rubber-Thermoplastic Compositions. Part VIII. Nitrile Rubber Polyolefin Blends with Technological CompatibilizationRubber Chemistry and Technology, 1983
- New developments in the field of blocked isocyanatesProgress in Organic Coatings, 1981
- The Thermal Dissociation of Blocked Toluene DiisocyanatesI&EC Product Research and Development, 1962