Phases and microstructures of high Zn‐containing Al–Zn–Mg–Cu alloys
- 18 March 2014
- journal article
- Published by Wiley in Rare Metals
- Vol. 35 (5) , 380-384
Abstract
Phases and microstructures of three high Zn‐containing Al–Zn–Mg–Cu alloys were investigated by means of thermodynamic calculation method, optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X‐ray diffraction (XRD), and differential scanning calorimetry (DSC) analysis. The results indicate that similar dendritic network morphologies are found in these three Al–Zn–Mg–Cu alloys. The as‐cast 7056 aluminum alloy consists of aluminum solid solution, coarse Al/Mg(Cu, Zn, Al) 2 eutectic phases, and fine intermetallic compounds η (MgZn 2 ). Both of as‐cast 7095 and 7136 aluminum alloys involve α(Al), eutectic Al/Mg(Cu, Zn, Al) 2 , intermetallic η (MgZn 2 ), and θ (Al 2 Cu). During homogenization at 450 °C, fine η (MgZn 2 ) can dissolve into matrix absolutely. After homogenization at 450 °C for 24 h, Mg(Cu, Zn, Al) 2 phase in 7136 alloy transforms into S(Al 2 CuMg) while no change is found in 7056 and 7095 alloys. The thermodynamic calculation can be used to predict the phases in high Zn‐containing Al–Zn–Mg–Cu alloys.Keywords
Funding Information
- National Natural Science Foundation of China (51271037)
This publication has 16 references indexed in Scilit:
- Effects of high magnetic field on the evolutions of constituent phases in 7085 aluminum alloy during homogenizationMaterials Characterization, 2012
- Effect of minor Sc and Zr addition on microstructures and mechanical properties of Al-Zn-Mg-Cu alloysTransactions of Nonferrous Metals Society of China, 2007
- Evolution of eutectic structures in Al-Zn-Mg-Cu alloys during heat treatmentTransactions of Nonferrous Metals Society of China, 2006
- The microstructural evolution of an Al–Zn–Mg–Cu alloy during homogenizationMaterials Letters, 2006
- On the nature of T(Al2Mg3Zn3) and S(Al2CuMg) phases present in as-cast and annealed 7055 aluminum alloyMaterials Science and Engineering: A, 2005
- Microstructural evolution in aluminium alloy 7050 during processingMaterials Science and Engineering: A, 2004
- Investigation of phase equilibria in alloys of the Al–Zn–Mg–Cu–Zr–Sc systemJournal of Alloys and Compounds, 2004
- A study of microstructure and microsegregation of aluminum 7050 alloyMaterials Science and Engineering: A, 2003
- Control of Equilibrium Phases (M,T,S) in the Modified Aluminum Alloy 7175 for Thick Forging ApplicationsMATERIALS TRANSACTIONS, 2003
- Precipitation sequences during quenching of the AA 7010 alloyActa Materialia, 2002