Laser lithographic approach to micro-optical freeform elements with extremely large sag heights.
Authors:
- 10 February 2012
- journal article
- Published by Optica Publishing Group in Optics Express
- Vol. 20 (4) , 4763-4775
Abstract
Artificial compound eye cameras are an attractive approach to generate imaging systems of maximum miniaturization. Their thickness can be reduced by a factor of two in comparison to miniaturized single aperture cameras with the same pixel size and resolution. The imaging performance of these systems can be improved significantly by the use of micro-optical refractive freeform arrays (RFFA). Due to the complexity of these non-symmetric surface profiles with sag heights larger than 50 µm in combination with extreme profile accuracies better than λ/14 (rms), there is no dedicated fabrication technology currently available. In the presented research, significant improvements in the fabrication of these elements with laser lithography were reached. Therefore, a laser lithographic process based on several coating steps in combination with a multiple exposure strategy was developed that is suitable for the fabrication of arbitrary freeform structures with sag heights up to 60 µm. In order to minimize surface deviations caused by unavoidable process nonlinearities, a compensation strategy based on an empirical process model is used. The achievable accuracy of the proposed method and its limitations were investigated by fabricating a spherical micro lens array for demonstration. The fabricated elements possess a shape deviation of less than 1.3 µm (rms) and can be used as master structures for a subsequent replication process in order to realize a cost efficient mass production of artificial compound eye optics on wafer level.Keywords
This publication has 30 references indexed in Scilit:
- Optical Cluster Eye fabricated on wafer-levelOptics Express, 2011
- Thin wafer-level camera lenses inspired by insect compound eyesOptics Express, 2010
- Applications of chirped microlens arrays for aberration compensation and improved system integration2006
- Design and fabrication of a chirped array of refractive ellipsoidal micro-lenses for an apposition eye camera objective2005
- Chirped arrays of refractive ellipsoidal microlenses for aberration correction under oblique incidenceOptics Express, 2005
- Miniaturized imaging systemsMicroelectronic Engineering, 2003
- Fabrication and properties of refractive micro-optical profiles for lenses, lens arrays, and beam-shaping elements2000
- Fabrication of optical components by laser lithographyApplied Surface Science, 1996
- Fabrication of micro-optical components by laser beam writing in photoresist1991
- The manufacture of microlenses by melting photoresistMeasurement Science and Technology, 1990