Effects of silane‐modified nano‐CaCO3 particles on the mechanical properties of carbon fiber/epoxy (CF/EP) composites
- 13 December 2022
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 44 (3) , 1805-1821
Abstract
In this study, the effects of silane‐treated nano‐CaCO3 particles on the flexural, Mode‐I, Mode‐II and interlaminar shear strength (ILSS) properties of carbon fiber/epoxy composites are investigated experimentally. The surface of nano‐CaCO3 particles is treated with a silane coupling agent, namely, (3‐Glycidyloxypropyl) trimethoxysilane (GPTMS). Three‐point bending, double cantilever beam (DCB), end‐notch flexure (ENF), and short beam shear (SBS) tests are carried out on the prepared composite specimens according to the relevant ASTM requirements. The results show that with the dispersion of 5 wt% silane‐treated nano‐CaCO3 particles the flexural modulus, flexural strength, Mode‐I fracture toughness, Mode‐II fracture toughness, and ILSS values can be enhanced by 16.8%, 13.6%, 25.7%, 19.6%, and 19.8%, respectively, compared to reference composites. The storage modulus is also increased by about 15.3% with the silane‐treated nano‐CaCO3 particles. The silane‐treated nano‐CaCO3 particles had no significant effect on the glass transition temperature of the composites.Keywords
This publication has 47 references indexed in Scilit:
- Compressive properties of nano-calcium carbonate/epoxy and its fibre compositesComposites Part B: Engineering, 2013
- Silane coupling agent modification on interlaminar shear strength of carbon fiber/epoxy/nano‐CaCo3 compositesPolymer Composites, 2012
- Mode‐I intralaminar fracture toughness of silica particles‐filled glass woven fabric‐reinforced vinyl ester compositesPolymer Composites, 2012
- Study on thermal and mechanical properties of nano-calcium carbonate/epoxy compositesMaterials & Design (1980-2015), 2011
- 1,3-Diamino-2-hydroxypropane-N,N,N′,N′-tetraacetic acid stabilized amorphous calcium carbonate: nucleation, transformation and crystal growthCrystEngComm, 2009
- Mode I and mode II fracture toughness of E-glass non-crimp fabric/carbon nanotube (CNT) modified polymer based compositesEngineering Fracture Mechanics, 2008
- Synthesis and characterization of polyimide/multi‐walled carbon nanotube nanocompositesPolymer Composites, 2008
- Study on mechanical property of epoxy composite filled with nano-sized calcium carbonate particlesJournal of Materials Science, 2005
- Silane pre-treatment of calcium carbonate nanofillers for polyurethane compositese-Polymers, 2004
- Effects of stearic acid coated talc, CaCO3, and mixed talc/CaCO3 particles on the rheological properties of polypropylene compoundsJournal of Applied Polymer Science, 2004