Dependencies of microstructure and stress on the thickness of GdBa2Cu3O7 − δ thin films fabricated by RF sputtering
Open Access
- 1 July 2013
- journal article
- research article
- Published by Springer Nature in Discover Nano
- Vol. 8 (1) , 304
Abstract
GdBa2Cu3O7 − δ (GdBCO) films with different thicknesses from 200 to 2,100 nm are deposited on CeO2/yttria-stabilized zirconia (YSZ)/CeO2-buffered Ni-W substrates by radio-frequency magnetron sputtering. Both the X-ray diffraction and scanning electron microscopy analyses reveal that the a-axis grains appear at the upper layers of the films when the thickness reaches to 1,030 nm. The X-ray photoelectron spectroscopy measurement implies that the oxygen content is insufficient in upper layers beyond 1,030 nm for a thicker film. The Williamson-Hall method is used to observe the variation of film stress with increasing thickness of our films. It is found that the highest residual stresses exist in the thinnest film, while the lowest residual stresses exist in the 1,030-nm-thick film. With further increasing film thickness, the film residual stresses increase again. However, the critical current (I c) of the GdBCO film first shows a nearly linear increase and then shows a more slowly enhancing to a final stagnation as film thickness increases from 200 to 1,030 nm and then to 2,100 nm. It is concluded that the roughness and stress are not the main reasons which cause the slow or no increase in I c. Also, the thickness dependency of GdBa2Cu3O7 − δ films on the I c is attributed to three main factors: a-axis grains, gaps between a-axis grains, and oxygen deficiency for the upper layers of a thick film.Keywords
This publication has 23 references indexed in Scilit:
- Chemical solution deposition using ink-jet printing for YBCO coated conductorsSuperconductor Science and Technology, 2012
- Attenuation of interfacial pinning enhancement in YBCO using a PrBCO buffer layerPhysica C: Superconductivity and its Applications, 2009
- The role of interfacial defects in enhancing the critical current density of YBa2Cu3O7−δcoatingsSuperconductor Science and Technology, 2009
- Fluorine-free water-based sol–gel deposition of highly epitaxial YBa2Cu3O7−δfilmsSuperconductor Science and Technology, 2009
- Materials science challenges for high-temperature superconducting wireNature Materials, 2007
- Thickness-induced residual stresses in textured YBCO thin films determined by crystalline group methodPhysica C: Superconductivity and its Applications, 2007
- Through-thickness superconducting and normal-state transport properties revealed by thinning of thick film ex situ YBa2Cu3O7−x coated conductorsApplied Physics Letters, 2003
- Strong pinning in high-temperature superconducting filmsPhysical Review B, 2002
- Substrate temperature dependence of the texture quality in YBCO thin films fabricated by on-axis pulsed-laser ablationSuperconductor Science and Technology, 1997
- XPS investigation of the surface composition of sputtered YBCO thin filmsPhysica C: Superconductivity and its Applications, 1995