Improved Electrical Performance of Perovskite Photovoltaic Mini‐Modules through Controlled PbI2 Formation Using Nanosecond Laser Pulses for P3 Patterning
Open Access
- 15 February 2021
- journal article
- research article
- Published by Wiley in Energy Technology
- Vol. 9 (4)
Abstract
The upscaling of perovskite solar cells to modules requires the patterning of the layer stack in individual cells that are monolithically interconnected in series. This interconnection scheme is composed of three lines, P1–P3, which are scribed using a pulsed laser beam. The P3 scribe is intended to isolate the back contact layer of neighboring cells, but is often affected by undesired effects such as back contact delamination, flaking, and poor electrical isolation. Herein, the influence of the laser pulse duration on the electrical and compositional properties of P3 scribe lines is investigated. The results show that both nanosecond and picosecond laser pulses are suitable for P3 patterning, with the nanosecond pulses leading to a higher open circuit voltage, a higher fill factor, and a higher power conversion efficiency. It is found that the longer pulse duration resultes in a larger amount of PbI2 formed within the P3 line and a thin Br‐rich interfacial layer which both effectively passivate defects at the scribe line edges and block charge carrier in its vicinity. Thus, nanosecond laser pulses are preferable for P3 patterning as they promote the formation of beneficial chemical phases, resulting in an improved photovoltaic performance.Keywords
Funding Information
- Bundesministerium für Forschung, Technologie und Raumfahrt (03XP0091, 01IO1806)
- Horizon 2020 Framework Programme (823717)
This publication has 37 references indexed in Scilit:
- Laser-Scribing Patterning for the Production of Organometallic Halide Perovskite Solar ModulesIEEE Journal of Photovoltaics, 2015
- Femtosecond Time-Resolved Transient Absorption Spectroscopy of CH3NH3PbI3 Perovskite Films: Evidence for Passivation Effect of PbI2Journal of the American Chemical Society, 2014
- High speed laser processing for monolithical series connection of silicon thin‐film modulesProgress in Photovoltaics: Research and Applications, 2007
- Thermoelastic modeling of microbump and nanojet formation on nanosize gold films under femtosecond laser irradiationApplied Physics A, 2005
- Electronic and optical properties of lead iodideJournal of Applied Physics, 2002
- Phase explosion under ultrashort pulsed laser ablation: modeling with analysis of metastable state of meltApplied Surface Science, 2002
- Pulsed laser ablation of solids: transition from normal vaporization to phase explosionApplied Physics A, 2001
- Thermal model of pulsed laser ablation under the conditions of formation and heating of a radiation-absorbing plasmaQuantum Electronics, 1999
- Simple technique for measurements of pulsed Gaussian-beam spot sizesOptics Letters, 1982
- Optical Constants of the Noble MetalsPhysical Review B, 1972