Unmodified Plant and Waste Oils as Functional Additives in PU Flooring Adhesives: A Comparative Study
Open Access
- 17 September 2025
- Vol. 30 (18) , 3780
Abstract
This work compares reactive (castor) and non-reactive (rapeseed, sunflower, linseed, and used cooking) oils, each at a dosage of 10 wt%, when incorporated into an in-house two-component polyurethane (PU) parquet adhesive. A commercial market adhesive was tested only as an external benchmark and was not modified. Mechanical properties were evaluated according to EN ISO 17178, inorganic leaching according to EN 12457-4, and volatile organics were screened by headspace GC–MS (not comparable to ISO 16000-9 chamber protocols). All in-house formulations met the EN ISO 17178 acceptance limits. The sunflower oil variant showed the highest shear strength, whereas rapeseed and castor oils provided stable tensile performance. HS-GC-MS did not yield high-confidence VOC identifications; therefore, no regulatory emission claim is made. The formulation with used cooking oil exhibited the largest variability and elevated leaching of Zn and Sb, underscoring the need for feedstock quality control. At 10 wt% loading, standard-compliant performance was obtained with both reactive and non-reactive oils, suggesting that physical modification can be sufficient, while castor oil may additionally react. In contrast to derivatized oils reported elsewhere, our approach employs unmodified oils, thereby avoiding extra reaction steps—such as epoxidation, hydroxylation, and transesterification—that typically increase the carbon footprint, while still meeting relevant standards. Full VOC chamber testing and LCA are beyond the scope of this study.Keywords
Funding Information
- Ministry of Education and Science (DWD/06/0180/2022)
- Wroclaw University of Environmental and Life Sciences (DWD/06/0180/2022)
This publication has 10 references indexed in Scilit:
- Green polyurethanes from bio-based building blocks: Recent advances and applicationsGreen Synthesis and Catalysis, 2025
- Characterization of Vegetable Oils for Direct Use in Polyurethane-Based Adhesives: Physicochemical and Compatibility AssessmentMaterials, 2025
- Waste-Cooking-Oil-Derived Polyols to Produce New Sustainable Rigid Polyurethane FoamsSustainability, 2024
- Measurement reproducibility and storage impact on VOC/SVOC emission rate from decorative materialsChemosphere, 2024
- Polyurethane Adhesives for Wood Based on a Simple Mixture of Castor Oil and Crude GlycerinMaterials, 2023
- Evaluation of the seasonal variation of VOC surface emissions and indoor air concentrations in a public building with bio-based insulationBuilding and Environment, 2023
- Comparative Study of the Presence of Heavy Metals in Edible Vegetable OilsApplied Sciences, 2023
- From Lab to Market: Current Strategies for the Production of Biobased PolyolsACS Sustainable Chemistry & Engineering, 2021
- Comparison of VOC Emissions Produced by Different Types of Adhesives Based on Test ChambersMaterials, 2021
- Leaching of Polyurethane Systems for Waterproofing Purposes Whilest CuringWater, Air, & Soil Pollution, 2017