Measurement of Mechanical Strength of Glass‐to‐Metal Joints
Authors:
Open Access
- 2 July 2015
- journal article
- research article
- Published by Wiley in Fuel Cells
- Vol. 15 (4) , 595-603
Abstract
Three different test geometries were used to apply shear loading to fracture glass‐to‐metal joints typical of seals intended for use in planar solid oxide fuel cells (SOFCs): asymmetric compression; symmetric compression; and four‐point asymmetric bending. The measured apparent shear strengths were found to differ by an order of magnitude depending on the test configuration employed. In particular, the apparent shear strength measured in the asymmetric compression test was very low. Conversely, the highest apparent shear strengths were measured using the symmetric compression test and the four‐point asymmetric bend test gave an intermediate result. It is shown, by finite element modelling, that these differences are caused by differences in the normal stresses transverse to the joint. The locus of failure was always along the glass/metal interface in all test geometries. It is concluded that mechanical test procedures used to characterize glass‐ceramic seals in SOFC stacks need to be selected and interpreted with great care.Keywords
This publication has 28 references indexed in Scilit:
- Assessment of the Sealing Joints within SOFC Stacks by Numerical SimulationFuel Cells, 2006
- Chemical interaction between glass–ceramic sealants and interconnect steels in SOFC stacksJournal of Power Sources, 2006
- Interaction of metallic SOFC interconnect materials with glass–ceramic sealant in various atmospheresJournal of Power Sources, 2005
- Crystallization kinetics of a solid oxide fuel cell seal glass by differential thermal analysisJournal of Power Sources, 2005
- Sealants for solid oxide fuel cellsJournal of Power Sources, 2005
- Deformation behavior and leakage tests of alternate sealing materials for SOFC stacksJournal of Power Sources, 2004
- Suitable Glass‐Ceramic Sealant for Planar Solid‐Oxide Fuel CellsJournal of the American Ceramic Society, 2004
- Glass-ceramic materials as sealants for SOFC applicationsMaterialwissenschaft und Werkstofftechnik, 2002
- A New Sealant Material for Solid Oxide Fuel Cells Using Glass-Ceramic.Journal of the Ceramic Society of Japan, 2001
- Influence of interface impurities on the fracture energy of UHV bonded niobium-sapphire bicrystalsActa Metallurgica et Materialia, 1992