Thermal, mechanical, and diffusional properties of nylon 6/ABS polymer blends: Compatibilizer effect
Authors:
- 1 July 2000
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 40 (7) , 1635-1642
Abstract
The thermal, mechanical, and water absorption properties of blends of nylon 6 (PA6) and acrylonitrile‐butadiene‐styrene copolymer (ABS) with and without the compatibilizer maleic anhydride (MAH) were studied. Polymers were melt‐blended using a twin screw extruder, and injection molded into sheets. Tensile and impact properties, hardness, heat deflection resistance, and dimensional stability were enhanced by the incorporation of MAH. Synergistic effects were observed for tensile elongation and flexural properties. The melting temperature and the thermal stability were not significantly affected by the incorporation of MAH. The mechanical property enhancement by the introduction of compatibilizer was explained by the formation of a micro‐domain structure in the blends. The equilibrium water uptake increased with increasing concentration of PA6, and the diffusion coefficient was determined from the water transport kinetics at different temperatures. Activation energy was extracted from the temperature dependence of the diffusion coefficient. No compatibilizer effect was observed in the swelling behavior.Keywords
This publication has 6 references indexed in Scilit:
- Morphology of nylon 6/ABS blends compatibilized by a styrene/maleic anhydride copolymerPolymer, 1994
- Mechanical properties and morphology of nylon-6/acrylonitrile-butadiene-styrene blends compatibilized with imidized acrylic polymersPolymer, 1994
- Structure and properties of compatibilized blends of polyamide‐6 and ABSJournal of Applied Polymer Science, 1993
- Physical properties of ABS/SMA/nylon-6 ternary blends: effect of blending sequencePolymer, 1993
- Morphological, thermal, and rheological properties of nylon/acrylonitrile‐butadiene‐styrene alloysPolymer Engineering & Science, 1992
- Reactive compatibilization of blends of nylon 6 and ABS materialsPolymer, 1991