Experimental Investigation of Opposing Mixed Convection in a Channel with an open Cavity Below
- 19 March 2008
- journal article
- research article
- Published by Taylor & Francis in Experimental Heat Transfer
- Vol. 21 (2) , 99-114
Abstract
In this article, mixed convection in an open cavity with a heated wall bounded by a horizontal unheated plate is investigated experimentally. The heated wall is on the opposite side of the forced inflow. The results are reported in terms of wall temperature profiles of the heated wall and flow visualization. The range of pertinent parameters used in this experiment are Reynolds numbers (Re) from 100 to 2,000 and Richardson numbers (Ri) from 4.3 to 6,400. Also, the ratio between the length and the height of cavity (L/D) ranges from 0.5–2.0, and the ratio between the channel and cavity height (H/D) is equal to 1.0. The lack of experimental results on mixed convection in a channel with an open cavity below was an impetus for investigating this configuration when one cavity vertical wall is heated at uniform heat flux. The present results show that at the lowest investigated Reynolds number, the surface temperatures are lower than the corresponding surface temperatures for Re = 2,000 at the same ohmic heat flux. The flow visualization shows that for Re = 1,000, there are two nearly distinct fluid motions: a parallel forced flow in the channel and a recirculation flow inside the cavity. For Re = 100, the effect of a stronger buoyancy determines a penetration of thermal plumes from the heated plate wall into the upper channel. Moreover, the flow visualization shows that for lower Reynolds numbers, the forced motion penetrates inside the cavity, and a vortex structure is adjacent to the unheated vertical plate. At higher Reynolds numbers, the vortex structure has a larger extension while L/D is held constant.Keywords
This publication has 16 references indexed in Scilit:
- Combined Forced- and Natural-Convection Heat Transfer in Horizontally CounterRotating Eccentric and Concentric CylindersNumerical Heat Transfer, Part A: Applications, 2007
- Mixed convection heat transfer in two-dimensional open-ended enclosuresInternational Journal of Heat and Mass Transfer, 2002
- DOUBLE-DIFFUSIVE MIXED CONVECTION IN A LID-DRIVEN ENCLOSURE FILLED WITH A FLUID-SATURATED POROUS MEDIUMNumerical Heat Transfer, Part A: Applications, 2002
- MIXED CONVECTION IN A RECTANGULAR ENCLOSURE WITH DISCRETE HEAT SOURCESNumerical Heat Transfer, Part A: Applications, 2000
- Computation of Turbulent Flow in Mixed Convection in a Cavity With a Localized Heat SourceJournal of Heat Transfer, 1995
- MIXED CONVECTION FROM A LOCALIZED HEAT SOURCE IN A CAVITY WITH CONDUCTING WALLS: A NUMERICAL STUDYNumerical Heat Transfer, Part A: Applications, 1993
- MIXED CONVECTION FROM AN ISOLATED HEAT SOURCE IN A RECTANGULAR ENCLOSURENumerical Heat Transfer, Part A: Applications, 1991
- Effect of Thermal Buoyancy on the Recirculating Flow in a Solar Pond for Energy Extraction and Heat RejectionJournal of Solar Energy Engineering, 1984
- Interaction between a stream which passes through an enclosure and natural convection within the enclosureInternational Journal of Heat and Mass Transfer, 1982
- Numerical Study of the Velocity and Temperature Fields in a Flow-Through ReservoirJournal of Heat Transfer, 1976