Cooperative Towing by Multi-Robot System That Maintains Welding Cable in Optimized Shape
Open Access
- 16 June 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 7 (4) , 11783-11790
Abstract
As considerable amounts of welding are required during ship construction, robotic automation is being promoted. However, current welding robots do not automate work in high or narrow places. One reason is that welding cannot be performed with sufficient accuracy because a welding robot with a torch cannot tow a heavy cable and thus may go off path. This paper proposes a multi-robot system for automating the execution of long welds in high and narrow places to address this problem. In the proposed method, towing vehicles are placed along the supply cable to reduce the load on the lead welding vehicle. In confined-space welding, the cable must not be excessively loaded, and obstacles such as walls must be avoided. Under the proposed method, autonomous movement of the towing vehicles is achieved by solving an optimization problem that considers these aims and minimizes the amount of change from the estimated current cable shape. The method was evaluated through simulation and real-world tests, in which it was applied successfully to tow the cable with a welding torch in a working area of 2.6 × 10 m2 (simulation) and of 3.4 × 5.5 m2 (real-world environment) without disturbing the lead vehicle's movement.Keywords
This publication has 19 references indexed in Scilit:
- A magnetic climbing robot to perform autonomous welding in the shipbuilding industryRobotics and Computer-Integrated Manufacturing, 2018
- Development of a spherical tether-handling device with a coupled differential mechanism for tethered teleoperated robots2016
- Novel omnidirectional climbing robot with adjustable magnetic adsorption mechanism2016
- A survey of platform designs for portable robotic welding in large scale structures2014
- Robots in the shipbuilding industryRobotics and Computer-Integrated Manufacturing, 2014
- Tether monitoring for entanglement detection, disentanglement and localisation of autonomous robotsRobotica, 2014
- Design and Optimal Research of a Non-Contact Adjustable Magnetic Adhesion Mechanism for a Wall-Climbing Welding RobotInternational Journal of Advanced Robotic Systems, 2013
- Mobile welding robot system based on rotating arc sensor applied for large fillet welding seam tracking2010
- Development of Genbu : Active wheel passive joint articulated mobile robot2003
- Accurate computation of F′(x) and F′(x) F″(x)Advances in Engineering Software (1978), 1982