Probabilistic seismic evaluation of SMA‐based self‐centering braced structures considering uncertainty of regional temperature
- 8 July 2021
- journal article
- research article
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 50 (13) , 3357-3378
Abstract
Smart materials such as shape memory alloys (SMAs) have unique material properties that can potentially mitigate structural damage against earthquake. However, the mechanical behavior of SMAs is sensitive to temperature variation. The traditional deterministic analysis, which does not take into account the influence of temperature, may lead to inaccurate and sometimes unsafe predictions of actual behavior of SMA‐based structures. This research aims to develop a modified framework based on the performance‐based earthquake engineering methodology, taking account of the uncertainty of regional temperature distribution for temperature‐dependent (TD) structures, where the SMA‐based one is considered as a representative case. As the main part of the methodology, regional seismic fragility is generated by combing temperature distribution properties and joint seismic fragility. The proposed methodology is applied to a six‐story self‐centering concentrically‐braced frame (SC‐CBF) with SMA‐based SC braces located in different regions in China. A simplified thermo‐mechanical model capturing the TD characteristics and possible failure of SMA cables is utilized. Deterministic nonlinear static and dynamic analysis is first conducted to understand the structural response. Then, the joint seismic fragility analysis of the SC‐CBF under different intensity levels of ground motion and temperatures is conducted via the incremental dynamic analysis method, by which the seismic performance of the structure can be fully captured. Finally, the proposed methodology is utilized to comprehensively evaluate the regional seismic fragility and collapse risk of the SC‐CBF in different regions. The results indicate that the ignorance of the temperature effect could underestimate the risk of collapse.Keywords
This publication has 48 references indexed in Scilit:
- Development and experimental validation of a nickel–titanium shape memory alloy self-centering buckling-restrained braceEngineering Structures, 2012
- Effect of Nonlinearity of Frame Buildings on Peak Horizontal Floor AccelerationJournal of Earthquake Engineering, 2011
- Seismic assessment of bridge structures isolated by a shape memory alloy/rubber-based isolation systemSmart Materials and Structures, 2010
- Potential of superelastic Cu–Al–Mn alloy bars for seismic applicationsEarthquake Engineering & Structural Dynamics, 2010
- Development of Probabilistic Framework for Performance-Based Seismic Assessment of Structures Considering Residual DeformationsJournal of Earthquake Engineering, 2010
- Evaluation of the performance of a sliding-type base isolation system with a NiTi shape memory alloy device considering temperature effectsEngineering Structures, 2010
- Effects of aging on stress-induced martensitic transformation in ductile Cu–Al–Mn-based shape memory alloysActa Materialia, 2009
- Mechanical properties of superelastic Cu–Al–Be wires at cold temperatures for the seismic protection of bridgesSmart Materials and Structures, 2008
- Effect of ambient temperature on the hinge opening in bridges with shape memory alloy seismic restrainersEngineering Structures, 2007
- Improved seismic hazard model with application to probabilistic seismic demand analysisEarthquake Engineering & Structural Dynamics, 2007