Life Cycle Assessment of Renewable Reductants in the Ferromanganese Alloy Production: A Review
Open Access
Abstract
This study examined the literature on life cycle assessment on the ferromanganese alloy production route. The environmental impacts of raw material acquisition through the production of carbon reductants to the production of ferromanganese alloys were examined and compared. The transition from the current fossil fuel-based production to a more sustainable production route was reviewed. Besides the environmental impact, policy and socioeconomic impacts were considered due to evaluation course of differences in the production routes. Charcoal has the potential to substantially replace fossil fuel reductants in the upcoming decades. The environmental impact from current ferromanganese alloy production can be reduced by ≥20% by the charcoal produced in slow pyrolysis kilns, which can be further reduced by ≥50% for a sustainable production in high-efficient retorts. Certificated biomass can ensure a sustainable growth to avoid deforestation and acidification of the environment. Although greenhouse gas emissions from transport are low for the ferromanganese alloy production, they may increase due to the low bulk density of charcoal and the decentralized production of biomass. However, centralized charcoal retorts can provide additional by-products or biofuel and ensure better product quality for the industrial application. Further upgrading of charcoal can finally result in a CO neutral ferromanganese alloy production for the renewable power supply.
Keywords
Funding Information
- Norges Forskningsråd (280968)
This publication has 82 references indexed in Scilit:
- Amazonian forest loss and the long reach of China’s influenceEnvironment, Development and Sustainability, 2012
- Energy Consumption and Carbon Dioxide Emissions in Rail and Road Freight Transport in Spain: A Case Study of Car Carriers and Bulk PetrochemicalsJournal of Intelligent Transportation Systems, 2012
- Biomass as a Source of Renewable Carbon for Iron and SteelmakingISIJ International, 2012
- COLONIZATION PATTERNS OF WOODY SPECIES ON LANDS MINED FOR COAL IN SPAIN: PRELIMINARY INSIGHTS FOR FOREST EXPANSIONLand Degradation & Development, 2011
- Spatial modelling of industrial heat loads and recovery potentials in the UKEnergy Policy, 2010
- ToSIA—A tool for sustainability impact assessment of forest-wood-chainsEcological Modelling, 2010
- Mechanisms of Thermochemical Biomass Conversion Processes. Part 1: Reactions of PyrolysisEnergy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2008
- Coal for metallurgical coke production: predictions of coke quality and future requirements for cokemakingInternational Journal of Coal Geology, 2002
- Emissions of greenhouse gases and other airborne pollutants from charcoal making in Kenya and BrazilJournal of Geophysical Research: Atmospheres, 2001
- Peasant charcoal production in the Peruvian Amazon: rainforest use and economic relianceForest Ecology and Management, 2001