Electro-brush plating Ni-Graphene oxide composite coating enhanced corrosion resistance of fluoride ion
Authors:
Open Access
- 1 February 2021
- journal article
- research article
- Published by IOP Publishing in Materials Research Express
- Vol. 8 (2) , 026406
Abstract
Ni-Graphene Oxide(GO) composite coating was prepared on Q235 steel plate by electro-brush plating technique to reduce the corrosion of fluoride ion. In this study, SEM, XRD and Raman tests were performed to analyze the morphologies and structures of the coatings, then electrochemical characterization was evaluated to determine the corrosion resistance. The results showed that GO provided more nucleation sites, and the surface of coatings looked more uniform and much denser because GO and Ni atoms were co-deposited on coating surface. The composite coating showed a better corrosion resistance than the pure nickel and there was an optimal addition amount of GO (Ni-GO/0.75 coating). In detail, the corrosion voltage increased from −0.61187 V to −0.52542 V, and the corrosion current correspondingly decreased from 26.6 μA·cm−2 to 6.8 μA·cm−2, correspondingly. The charge transfer resistance was also increased from 558.6 Ω to 1769.0 Ω. Moreover, the immersion testing demonstrated that the weight loss of Ni-GO/0.75 composite coating was only 22.2% of the pure nickel. In addition, XPS spectra indicated that the fluoride ions in the corrosive medium preferentially bonded with nickel atoms, preventing the medium from entering the active area. In conclusion, Ni-GO composite coating exhibited excellent corrosion resistance to fluoride ion due to the impermeability and high conductivity of GO.Keywords
Funding Information
- Dalian Discipline (1001/12002038)
This publication has 44 references indexed in Scilit:
- Epitaxial growth and electrical performance of graphene/3C–SiC films by laser CVDJournal of Alloys and Compounds, 2020
- Synthesis and properties of a novel Ni–Co and Ni–Co/ZrO2 composite coating by DC electrodepositionJournal of Alloys and Compounds, 2020
- A low temperature electroless nickel plating chemistrySurface and Coatings Technology, 2019
- Effect of thermal processing on the tribology of nanocrystalline Ni/TiO2 coatingsEmergent Materials, 2018
- Deposition rate dependent phase/mechanical property evolution in zirconia and ceria-zirconia thin film by EB-PVD techniqueJournal of Alloys and Compounds, 2018
- Pulse electrodeposition and characterisation of Ni–SiC composite coatings in presence of ultrasoundTransactions of the IMF, 2012
- Study on corrosion resistance of gas cylinder materials in HF, HCl and HBr environmentsCorrosion Engineering, Science and Technology: The International Journal of Corrosion Processes and Corrosion Control, 2009
- Purification of dilute hydrofluoric acid by commercial ion exchange resinsSeparation and Purification Technology, 2007
- Fluorine chemistry at the millenniumJournal of Fluorine Chemistry, 2005
- Materials selection for HBr serviceCorrosion Science, 1995