Evaluation of Out-of-Plane Response of R/C Structural Wall Boundary Edges Detailed with Maximum Code-Prescribed Longitudinal Reinforcement Ratio
Open Access
- 17 January 2020
- journal article
- research article
- Published by Springer Nature in International Journal of Concrete Structures and Materials
- Vol. 14 (1) , 3
Abstract
One type of failure of reinforced concrete seismic walls is out-of-plane buckling. This type of failure appears at the compressive cycle of loading during the cyclic seismic loading. This work is mainly experimental and tries to investigate the influence of the mechanical factor of tensile deformation on the behavior of seismic walls and particularly on the phenomenon of lateral buckling. Five test specimens are constructed simulating the confined boundary regions of structural walls. They are reinforced using the maximum longitudinal reinforcement ratio (4.02%) prescribed by modern seismic and concrete codes for boundary ends. Apart from the investigation of the factor of elongation degree, this method tries to examine if the detailing of walls using maximum allowable reinforced ratio for longitudinal reinforcement inhibits the appearance of transverse buckling. Each prism specimen was strained under different tensile deformation. Degrees of elongation used were equal to 0‰, 10‰, 20‰, 30‰ and 50‰. After the first tensile cycle of loading, a second compression loading cycle was applied on each specimen, till their failure. Thus, nine experiments were carried out in total-two for each specimen apart from the first specimen which suffered zero elongation. Empirical equations are derived trying to estimate the ultimate bearing capacity and the normalized axial deformation at failure for the different tensile degrees.Keywords
This publication has 25 references indexed in Scilit:
- Influence of elongation degree on transverse buckling of confined boundary regions of R/C seismic wallsConstruction and Building Materials, 2019
- Tests on Thin Reinforced Concrete Walls Subjected to In‐Plane and Out‐of‐Plane Cyclic LoadingEarthquake Spectra, 2017
- Estimation of Shear Strength of Structural Shear WallsJournal of Structural Engineering, 2010
- Inelastic Effective Length Factor of Nonsway Reinforced Concrete ColumnsJournal of Structural Engineering, 2009
- Minimum thickness for ductile RC structural wallsEngineering Structures, 2005
- Inelastic design of low-axially loaded high-strength reinforced concrete columnsEngineering Structures, 2003
- Compression Bending of Scale-Model Reinforced-Concrete WallsJournal of Engineering Mechanics, 1996
- Performance of Buildings With Shear Walls in Earthquakes of the Last Thirty YearsPCI Journal, 1995
- Experimental assessment of low‐aspect‐ratio, reinforced concrete shear wall stiffnessEarthquake Engineering & Structural Dynamics, 1993
- Experimental behaviour of reinforced concrete walls under earthquake loadingEarthquake Engineering & Structural Dynamics, 1990