Numerical Simulation of an Experimental Ocean Current Turbine
Authors:
- 16 October 2012
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Oceanic Engineering
- Vol. 38 (1) , 131-143
Abstract
The development of a numeric simulation for predicting ocean current turbine performance is presented in this paper along with performance predictions. This numeric model uses an unsteady blade element momentum (BEM) rotor model to calculate the rotor forces and seven degree-of-freedom (DOF) equations of motion to calculate the coupled effects between the rotor and the main body. For the results presented in this paper, this simulation is set to model a 20-kW experimental ocean current turbine, and performance predictions are made for environmental condition that it will likely operate when deployed in the Gulf Stream off Southeast Florida. This model predicts that this turbine will have a maximum rotor power coefficient of 0.45 and that the vertical current gradient will only minimally affect the system performance. This simulation is also used to quantify the cyclic loadings that will be induced for misalignments between the rotor axis and the incoming flow, and it predicts the system motions and the forces on the rotor when the system is operating in a wave field.Keywords
This publication has 14 references indexed in Scilit:
- Global numeric analysis of a moored ocean current turbine testing platform2010
- Hydrokinetic power resource assessment of the Florida Current2010
- A 20 KW open ocean current test turbine2008
- Florida's Center for Ocean Energy Technology2008
- A Detailed investigation of the Blade Element Momentum (BEM) model based on analytical and numerical results and proposal for modifications of the BEM modelJournal of Physics: Conference Series, 2007
- Power and thrust measurements of marine current turbines under various hydrodynamic flow conditions in a cavitation tunnel and a towing tankRenewable Energy, 2007
- Design of a prototype ocean current turbine—Part II: flight control systemOcean Engineering, 2006
- Design of a prototype ocean current turbine—Part I: mathematical modeling and dynamics simulationOcean Engineering, 2006
- Measurements and predictions of forces, pressures and cavitation on 2-D sections suitable for marine current turbinesProceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 2004
- XFOIL: An Analysis and Design System for Low Reynolds Number Airfoils1989