Load-Carrying Fillet Welds Using Dual Boundary Element Method
Authors:
- 1 December 1997
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 123 (12) , 1603-1613
Abstract
The fatigue behavior of load-carrying cruciform fillet welded joints has been studied extensively using the dual boundary element method. This method, which incorporates two independent boundary integral equations, uses the displacement equation to model one of the crack boundaries and the traction equation to model the other. As a consequence, the analysis of the welded joints can be performed effectively in a single-region formulation. It is shown that the stress intensity factors (SIFs) at the weld toe and at the weld root are approximately equal when γ and λ are equal to 1.0 and 1.7, respectively, where γ and λ are the ratios of the embedded crack length 2a, and weld leg length w, to the main plate thickness T. In other words, the weld size, w, should be Mk, and the SIFs, K, at the weld root, are calculated using the J-integral in the analysis. They are compared directly with the results derived from the code of practice. Finally, an attempt is made to estimate the theoretical fatigue life of such welded joints using the two approaches.Keywords
This publication has 4 references indexed in Scilit:
- Analysis of fatigue strength on non-load-carrying and load-carrying fillet welded jointsThe Journal of Strain Analysis for Engineering Design, 1994
- Elementary engineering fracture mechanics1982
- Fatigue Strength of Fillet Welded Cruciform JointsJournal of the Structural Division, 1979
- On the Crack Extension in Plates Under Plane Loading and Transverse ShearJournal of Basic Engineering, 1963