Richardson Number Ratio Effect on Laminar Mixed Convection of a Nanofluid Flow in an Annulus
- 31 January 2013
- journal article
- research article
- Published by Taylor & Francis in International Journal for Computational Methods in Engineering Science and Mechanics
- Vol. 14 (4) , 304-316
Abstract
The effect of Richardson number ratio of the walls on the laminar mixed convection of a nanofluid flowing in an annulus which was heated uniformly is studied numerically. The finite volume technique is utilized to discretize and to solve a set of three-dimensional elliptic governing equations. The secondary flows and contour of the dimensionless axial velocity and dimensionless temperature are presented and discussed. For a given inner or outer wall Ri, the convective heat transfer coefficient of the walls changes differently with Richardson number ratio ( and γ) while inner, outer, and area average friction coefficients do not significantly change. The dimensionless axial velocity profiles shift toward the wall whose Richardson number has a fixed value at the upper vertical plane. The most effect on the axial velocity occurs at the upper vertical plane with respect to or γ. Also, for a given Rii or Rio, the inner and outer wall convective heat transfer coefficient does not increase permanently with increase in or γ.Keywords
This publication has 50 references indexed in Scilit:
- Heat transfer enhancement and pressure drop characteristics of TiO2–water nanofluid in a double-tube counter flow heat exchangerInternational Journal of Heat and Mass Transfer, 2009
- Mixed convection with heating effects in a vertical porous annulus with a radially varying magnetic fieldInternational Journal of Heat and Mass Transfer, 2008
- Mixed convection with variable viscosity in a vertical annulus with uniform wall temperaturesInternational Journal of Heat and Mass Transfer, 2008
- Numerical Investigation of Laminar Forced Convection of Nanofluids through Circular PipesJournal of Enhanced Heat Transfer, 2008
- Microwave plasma synthesis of TiN and ZrN nanopowdersMaterials Letters, 2007
- Heat transfer properties of nanoparticle-in-fluid dispersions (nanofluids) in laminar flowInternational Journal of Heat and Mass Transfer, 2005
- Experimental investigation into convective heat transfer of nanofluids at the entrance region under laminar flow conditionsInternational Journal of Heat and Mass Transfer, 2004
- Pool boiling characteristics of nano-fluidsInternational Journal of Heat and Mass Transfer, 2003
- Transient forced convection in the entrance region of concentric annuliInternational Journal of Heat and Mass Transfer, 1992
- An investigation into thermal boundary layer growth in the entrance region of an annulusInternational Journal of Heat and Mass Transfer, 1973