Ultrathin Li–Si–O Coating Layer to Stabilize the Surface Structure and Prolong the Cycling Life of Single-Crystal LiNi0.6Co0.2Mn0.2O2 Cathode Materials at 4.5 V
Authors:
- 23 February 2021
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (9) , 10952-10963
Abstract
Single-crystal LiNi1–x–yCoxMnyO2 cathode materials can effectively suppress intergranular cracks that usually is seen in commercial polycrystal LiNi1–x–yCoxMnyO2 cathode materials. However, the surface structure degradation for single-crystal LiNi1–x–yCoxMnyO2 cathode materials is still aggravated at a higher cutoff voltage (over 4.5 V). In this work, we prepare single-crystal LiNi0.6Co0.2Mn0.2O2 cathode materials via a solid-state method and then coat an ultrathin Li–Si–O layer on their surface by a wet coating method. The results show that the single-crystal LiNi0.6Co0.2Mn0.2O2 cathode materials with a Li–Si–O coating layer deliver excellent cycling performance even at a higher cutoff voltage of 4.5 V. The optimized Li–Si–O-modified sample displays a capacity retention of 90.6% after 100 cycles, whereas only 68.0% for unmodified single-crystal LiNi0.6Co0.2Mn0.2O2. Further analysis of the cycled electrodes reveals that the surface structure degradation is the main reason for the decrease of electrochemical performance of single-crystal LiNi0.6Co0.2Mn0.2O2 at a high voltage (4.5 V). In contrast, with Li–Si–O coating, this phenomenon can be suppressed effectively to maintain interfacial stability and prolong the cycling life.Keywords
Funding Information
- Science and Technology Commission of Shanghai Municipality (19DZ2270100)
- National Natural Science Foundation of China (22075051)
This publication has 44 references indexed in Scilit:
- Compositionally Graded Cathode Material with Long‐Term Cycling Stability for Electric Vehicles ApplicationAdvanced Energy Materials, 2016
- Graphical analysis of electrochemical impedance spectroscopy data in Bode and Nyquist representationsJournal of Power Sources, 2016
- Microstructural study on degradation mechanism of layered LiNi0.6Co0.2Mn0.2O2 cathode materials by analytical transmission electron microscopyJournal of Power Sources, 2016
- Nickel‐Rich and Lithium‐Rich Layered Oxide Cathodes: Progress and PerspectivesAdvanced Energy Materials, 2015
- Nickel‐Rich Layered Lithium Transition‐Metal Oxide for High‐Energy Lithium‐Ion BatteriesAngewandte Chemie International Edition, 2015
- Dynamic electrochemical impedance spectroscopy reconstructed from continuous impedance measurement of single frequency during charging/dischargingJournal of Power Sources, 2015
- Challenges for Rechargeable Li BatteriesChemistry of Materials, 2009
- Building better batteriesNature, 2008
- Optimization of Ni2+/Ni3+ ratio in layered Li(Ni,Mn,Co)O2 cathodes for better electrochemistryJournal of Power Sources, 2007
- Synthesis and characterization of LiNi1−x−yCoxMnyO2 as the cathode materials of secondary lithium batteriesJournal of Power Sources, 1999