Chairside finishing and polishing of modern dental ceramics: material-specific variations in surface roughness
Open Access
- 5 January 2026
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Materials
- Vol. 12, 1744731
Abstract
Aim: This study examines the effects of chairside finishing and polishing on the surface roughness (SR) of zirconia (ZR), lithium disilicate (LD), and hybrid ceramics (HC) to identify material-specific variations and determine optimal clinical protocols for smooth, durable, and esthetic ceramic surfaces. Methodology: Three modern dental ceramics Zr (IPS e. max® ZirCAD), LD (IPS e. max® CAD), and HC (Vita Enamic®) were used to create 135 disc-shaped specimens. Each specimen (10 mm diameter×2 mm) was either glazed or finished polished following the protocols set for study. A Profilometer evaluated SR of the two surfaces in micrometers (μm), while the surface topography was examined using scanning-electron-microscope (SEM). Using SPSS, ANOVA and post hoc multi-comparison tests were used for statistical analysis. Results: One-way ANOVA revealed significant differences among groups (p < 0.05). For Zr, the glazed specimens exhibited the highest SR (p = 0.000), while OptraFine® and Diasynt® produced smoother surfaces with no significant difference between them (p = 0.226). In the LD group, Diasynt® showed significantly higher roughness compared with both OptraFine® and glazed specimens (p = 0.000), whereas OptraFine® and glazed groups did not differ significantly (p = 0.060). For HC, Diasynt® produced the highest roughness, followed by glazing, with OptraFine® yielding the smoothest surfaces. Overall, OptraFine® consistently yielded the lowest surface roughness across all materials, with LD exhibiting the smoothest surfaces (0.119 ± 0.031 µm). Conclusion: SR of CAD/CAM ceramics was influenced by both material type and finishing method. OptraFine® consistently produced the smoothest surfaces. LD was the smoothest material, and ZR benefited more from polishing than glazing. Material-specific finishing is essential for optimal smoothness, esthetics, and durability.Keywords
This publication has 25 references indexed in Scilit:
- Comparative effects of glazing versus polishing on mechanical, optical, and surface properties of zirconia ceramics with different translucenciesClinical and Experimental Dental Research, 2024
- Comparative study on the effects of different polishing methods on tooth surface microstructure and roughness following initial periodontal treatmentClinical and Experimental Dental Research, 2024
- On the Use of Surface Roughness ParametersTribology Letters, 2023
- Effects of glazing methods on the optical and surface properties of silicate ceramicsJournal of Prosthodontic Research, 2020
- Evaluation of the trueness and precision of eight extraoral laboratory scanners with a complete-arch model: a three-dimensional analysisJournal of Prosthodontic Research, 2019
- Effect of glazing on translucency, color, and surface roughness of monolithic zirconia materialsJournal of Esthetic and Restorative Dentistry, 2019
- Effect of Finishing and Polishing on the Surface Roughness of Four Ceramic Materials after Occlusal AdjustmentJournal of Esthetic and Restorative Dentistry, 2016
- Effects of surface-finishing protocols on the roughness, color change, and translucency of different ceramic systemsThe Journal of Prosthetic Dentistry, 2014
- Effect of glazed and polished surface finishes on the friction coefficient of two low-fusing ceramicsThe Journal of Prosthetic Dentistry, 2005
- Comparison of three systems for the polishing of an ultra-low fusing dental porcelainThe Journal of Prosthetic Dentistry, 2004