Research on Longitudinal Vibration Characteristic of the Six-Cable-Driven Parallel Manipulator in FAST
Authors:
Open Access
- 1 January 2013
- journal article
- Published by SAGE Publications in Advances in Mechanical Engineering
- Vol. 5
Abstract
The first adjustable feed support system in FAST is a six-cable-driven parallel manipulator. Due to flexibility of the cables, the cable-driven parallel manipulator bears a concern of possible vibration caused by wind disturbance or internal force from the fine drive system. The purpose of this paper is to analyze vibration characteristic of the six-cable-driven parallel manipulator in FAST. The tension equilibrium equation of the six-cable-driven parallel manipulator is set up regarding the cables as catenaries. Then, vibration equation is established considering the longitudinal vibration of the cables. On this basis, the natural frequencies are depicted in figures since both analytical and numerical solutions are ineffective. Influence of the sags of the cables on the natural frequencies is discussed. It is shown that the sags of the cables will decrease the natural frequencies of the six-cable-driven parallel manipulator. Simplification to acquire the natural frequencies is proposed in this paper. The results justify effectiveness of the simplification to calculate the first-order natural frequencies. Distribution of the first-order natural frequencies in the required workspace is provided based on the simplification method. Finally, parameters optimization is implemented in terms of natural frequencies for building the six-cable-driven parallel manipulator in FAST.Keywords
Funding Information
- National Natural Science Foundation of China (11178012, 51205224)
- National Natural Science Foundation of China (11178012, 51205224)
This publication has 15 references indexed in Scilit:
- Vibration Characteristic of 6-DOF Cable-driven Parallel ManipulatorJournal of Mechanical Engineering, 2013
- Dimensional Design on the Six-Cable Driven Parallel Manipulator of FASTJournal of Mechanical Design, 2011
- THE FIVE-HUNDRED-METER APERTURE SPHERICAL RADIO TELESCOPE (FAST) PROJECTInternational Journal of Modern Physics D, 2011
- Dynamic modeling and wind vibration control of the feed support system in FASTNonlinear Dynamics, 2011
- Vibration analysis of cable-driven parallel manipulatorsMultibody System Dynamics, 2009
- Analysis and design of 3T cable-driven parallel manipulator for the feedback’s orientation of the large radio telescopeChinese Journal of Mechanical Engineering, 2007
- Erratum: “Stiffness of Cable-based Parallel Manipulators With Application to Stability Analysis” [Journal of Mechanical Design, 2006, 128(1), pp. 303–310]Journal of Mechanical Design, 2006
- Design, analysis and realization of tendon-based parallel manipulatorsMechanism and Machine Theory, 2005
- Robust and adaptive boundary control of a stretched string on a moving transporterIEEE Transactions on Automatic Control, 2001
- High-speed manipulation by using parallel wire-driven robotsRobotica, 2000