Cold Starts Using M-85 (85% Methanol): Coping with Low Fuel Volatility and Spark Plug Wetting
Authors:
- 1 February 1991
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Spark ignition engines are shown to have difficulty starting on high methanol-content fuels not only because of low fuel volatility but also because of electrical shorting of the ignition by methanol on the spark plugs. Using a concerted approach in which the fuel and ignition systems are optimized for fuel methanol, we have cold started a 2.5L spark ignition engine with port fuel injection down to -29°C on a 10.5 psi Reid vapor pressure M-85 (85% methanol, 15% gasoline). To minimize the amount of spark plug wetting, an exponential decay fuel algorithm is used which quickly generates flammable vapor mixtures while limiting the cylinder wetting. To overcome the spark plug wetting which does occur, ignition systems are used which have peak delivered currents twice as high as present-day automotive inductive ignitions.Keywords
This publication has 10 references indexed in Scilit:
- Review of the Cold Starting Performance of Methanol and High Methanol Blends in Spark Ignition Engines: Neat MethanolSAE International Journal of Advances and Current Practices in Mobility, 1990
- Compression Temperatures in a Cold Cranking EngineSAE International Journal of Advances and Current Practices in Mobility, 1988
- Spark Ignition Engine Cold Starting with Methanol-Based Fuel BlendsSAE International Journal of Advances and Current Practices in Mobility, 1987
- Unassisted Cold Starts to −29°C and Steady-State Tests of a Direct-Injection Stratified-Charge (DISC) Engine Operated on Heat AlcoholsSAE International Journal of Advances and Current Practices in Mobility, 1987
- A Vapour Pressure Model for Methanol/Gasoline M85 BlendsSAE International Journal of Advances and Current Practices in Mobility, 1987
- Evaporative Emissions from Gasolines and Alcohol-Containing Gasolines with Closely Matched VolatilitiesSAE International Journal of Advances and Current Practices in Mobility, 1986
- Recommended methods for the purification of solvents and tests for impurities: methanol and ethanolPure and Applied Chemistry, 1985
- Characteristics of Primed Methanol Fuels for Passenger CarsSAE International Journal of Advances and Current Practices in Mobility, 1983
- Methanol fuel modification for highway vehicle use. Final report1978
- Conductivity Studies in Methanol1,2Journal of the American Chemical Society, 1951