Changes in the adhesion strength between copper thin films and polyimide substrates after heat treatment
Authors:
- 1 January 1997
- journal article
- Published by Taylor & Francis in Journal of Adhesion Science and Technology
- Vol. 11 (6) , 783-795
Abstract
The adhesion strength between a copper (Cu) thin film and a polyimide [pyromellitic dianhydride-oxydianiline (PMDA-ODA)] substrate is reduced by heat treatment at 150°C in air. In this work, we determined the changes in adhesion strength between Cu films and polyimide substrates using Auger electron spectroscopy (AES), attenuated total reflection Fourier-transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). The analysis showed that the weak boundary layer (WBL) shifted towards the Cu interface as the heat treatment time was increased. To confirm this shift, we looked at two other polyimide substrates: biphenyl dianhydride-p-phenylene diamine (BPDA-PDA) and biphenyl dianhydride-oxydianiline (BPDA-ODA). Comparing the adhesion strength for the Cu thin film, the adhesion strength was high for the Cu/PMDA-ODA and Cu/BPDA-ODA laminates, but very low for the Cu/BPDA-PDA laminate. One of the possible reasons for this behavior could be that the ether moiety between the two benzene rings in ODA is related to the adhesion between a Cu film and an 02-plasma-treated polyimide (PI) substrate. The relationship between the adhesion strength and chemical bonding states is also discussed. We conclude that a Cu thin film sputtered onto a PI substrate is apt to peel at the oxidized interface, due to the heat treatment.Keywords
This publication has 12 references indexed in Scilit:
- Oxygen induced adhesion degradation at metal/polyimide interfaceJournal of Vacuum Science & Technology A, 1991
- Studies of adhesion of metal films to polyimideJournal of Vacuum Science & Technology A, 1991
- An XPS study of the in-situ formation of the polyimide/copper interfaceApplied Surface Science, 1991
- Oxidation of Cu in contact with preimidized polyimideJournal of Vacuum Science & Technology A, 1990
- Interfacial reactions at copper surfaces coated with polymer filmsJournal of Vacuum Science & Technology A, 1989
- A study of the adhesion of copper to polyimide foils using surface analytical techniquesAnalytical and Bioanalytical Chemistry, 1989
- Oxidation at the polyimide/Cu interfaceJournal of Vacuum Science & Technology A, 1988
- Adhesion and interface studies between copper and polyimideJournal of Adhesion Science and Technology, 1987
- Interaction of metals with model polymer surfaces: Core level photoemission studiesJournal of Vacuum Science & Technology A, 1986
- Interfacial reaction during metallization of cured polyimide: An XPS studyJournal of Vacuum Science & Technology A, 1984