A study of the bond behavior of FRP bars in MPC seawater concrete
Authors:
- 9 September 2020
- journal article
- research article
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 24 (6) , 1110-1123
Abstract
Using magnesium potassium phosphate cement (MPC) and fiber-reinforced polymer (FRP) bar to produce reinforced concrete can overcome the durability problems facing conventional steel reinforced PC concrete. In addition, FRP bar reinforced MPC concrete can also mitigate the CO 2 emission issues caused by Portland cement (PC) production and the shortage of natural resources such as virgin aggregates and freshwater. This paper, therefore, is aimed at investigating the bond behavior of the FRP bars in MPC seawater concrete. The direct pullout tests were conducted with a steel bar, BFRP bar, and GFRP bar embedded into different concretes. The effects of reinforcing bars, type of concrete and mixing water on the bond behavior of FRP and steel bars were investigated and discussed. The results showed that the MPC concrete increases the bond strength of BFRP and GFRP bars by 51.06% and 24.42%, respectively, compared with that in PC concrete. Using seawater in MPC concrete can enhance the bond strength of GFRP bar by 13.75%. The damage interface of the FRP bar -MPC is more severe than that of PC with a complete rupture of the FRP ribs and peeling-off of the resin compared to that in steel reinforced MPC specimens. Moreover, the bond stress-slip models were developed to describe the bond behavior of MPC-FRP specimen, and the analytical results match well with the experimental data. In conclusion, the FRP bars showed better bond behavior in the MPC seawater concrete than that in the PC counterparts.Keywords
Funding Information
- the Key Research Project by Department of Education of Guangdong Province, China (2018KZDXM068)
- Department of Education of Guangdong Province (2019KCXTD013)
- National Natural Science Foundation of China (51678149)
This publication has 25 references indexed in Scilit:
- Bond Stress-Slip Behavior: Case of GFRP Bars in Geopolymer ConcreteJournal of Materials in Civil Engineering, 2015
- Factors that affect the properties of magnesium phosphate cementConstruction and Building Materials, 2013
- Combined effects of saline solution and moist concrete on long-term durability of GFRP reinforcing barsConstruction and Building Materials, 2013
- Use of sand coating to improve bonding between GFRP bars and concreteJournal of Composite Materials, 2012
- Effect of seawater for mixing and curing on structural concreteThe IES Journal Part A: Civil & Structural Engineering, 2010
- Experimental study of bond behaviour between concrete and FRP bars using a pull-out testComposites Part B: Engineering, 2009
- Bond performance of polystyrene aggregate concrete (PAC) reinforced with glass-fibre-reinforced polymer (GFRP) barsBuilding and Environment, 2008
- Attack on plain and blended cements exposed to aggressive sulfate environmentsCement and Concrete Composites, 2002
- Behavior and Modeling of Bond of FRP Rebars to ConcreteJournal of Composites for Construction, 1997
- Suitability of sea water for mixing structural concrete exposed to a marine environmentCement and Concrete Composites, 1995