Applying Variable-Switching-Frequency Variable-Phase-Shift Control and E-Mode GaN HEMTs to an Indirect Matrix Converter-Based EV Battery Charger
Authors:
- 6 July 2017
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 3 (3) , 554-564
Abstract
An indirect matrix converter is employed directly converting the grid ac to the battery voltage, with the dual-active-bridge taking care of the power factor correction and power delivery simultaneously. Such circuit is regarded as one candidate of the high-efficiency and high-power-density electric vehicle on-board chargers, if the double-frequency current ripple to the battery is tolerated. Instead of optimizing the overall charger, this paper is focused on adopting variable switching frequency with multiple phase shifts to accommodate the wide input range (80–260 $V_{\mathrm{ ac}}$ ) and output range (200 V–450 $V_{\mathrm{ dc}}$ ). In addition to the phase shift between the transformer primary-side and secondary-side voltage, one extra phase shift is added to the primary-side H-bridge when the instantaneous input voltage is higher than the reflected output, otherwise, to the secondary side. The goal is to secure zero-voltage-switching for all switches at all voltage range. Such control strategy is further optimized incorporating with the switch parasitic capacitance and dead-band settings. To further enhance the charger performance, GaN HEMTs are equipped to the on-board charger aiming at higher efficiency and higher power density than Si devices. Experimental results indicated that such charger with proposed control strategy embraces the peak efficiency of >97% at 7.2 kW and a power density of ~4 kW/L.
Keywords
This publication has 23 references indexed in Scilit:
- Full-Process Operation, Control, and Experiments of Modular High-Frequency-Link DC Transformer Based on Dual Active Bridge for Flexible MVDC Distribution: A Practical TutorialIEEE Transactions on Power Electronics, 2016
- Minimum-Current-Stress Scheme of Dual Active Bridge DC-DC Converter With Unified-phase-shift ControlIEEE Transactions on Power Electronics, 2016
- A High-Density, High-Efficiency, Isolated On-Board Vehicle Battery Charger Utilizing Silicon Carbide Power DevicesIEEE Transactions on Power Electronics, 2014
- Bi-directional PHEV battery charger based on normally-off GaN-on-Si multi-chip module2014
- Optimal ZVS Modulation of Single-Phase Single-Stage Bidirectional DAB AC–DC ConvertersIEEE Transactions on Power Electronics, 2013
- Modelling and ZVS control of an isolated three-phase bidirectional AC-DC converter2013
- An Automotive Onboard 3.3-kW Battery Charger for PHEV ApplicationIEEE Transactions on Vehicular Technology, 2012
- Eliminate Reactive Power and Increase System Efficiency of Isolated Bidirectional Dual-Active-Bridge DC–DC Converters Using Novel Dual-Phase-Shift ControlIEEE Transactions on Power Electronics, 2008
- Operation, design and control of dual H-bridge-based isolated bidirectional DC–DC converterIET Power Electronics, 2008
- Experimental Study of a Soft-Switched Isolated Bidirectional AC DC Converter Without Auxiliary CircuitIEEE Transactions on Power Electronics, 2006