Optimum design of distributed power-FET amplifiers. Application to a 2-18 GHz MMIC module exhibiting improved power performances
Authors:
- M. CampovecchioMCM. Campovecchio
- B. Le BrasBBB. Le Bras
- M. LajugieMLM. Lajugie
- J. ObregonJOJ. Obregon
- 1 May 1994
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 125-128
Abstract
International audienceA suitable and effective design method of distributed power amplifiers, based on the optimum FET load requirement for power operation, is proposed in this paper. An analytical determination of the gate and drain line characteristic admittances provides both the initial values and right directions for an optimum design. The best trade-offs between wide band and high power operation have been investigated. To validate the method, a FET amplifier demonstrator with a gate periphery of 1.2 mm has been manufactured at the Texas Instruments foundry. The MMIC amplifier demonstrated state of the art power density performance of 340 mW/mm over the 2-18 GHz band associated with 14.2% power added efficiency, 26.5% drain efficiency and 26.1 dBm output power at 1 dB compression in CW operationKeywords
This publication has 4 references indexed in Scilit:
- On power distribution in additive amplifiersIEEE Transactions on Microwave Theory and Techniques, 1990
- Capacitively Coupled Traveling-Wave Power AmplifierIEEE Transactions on Microwave Theory and Techniques, 1984
- On Theory and Performance of Solid-State Microwave Distributed AmplifiersIEEE Transactions on Microwave Theory and Techniques, 1983
- Distributed AmplificationProceedings of the IRE, 1948