Characterization of asphalt binders blended with nanomaterial and polymer
Authors:
- S I A AliS I A Ali
- A AbubakerAAA Abubaker
- A B Z AlshetwiAAA B Z Alshetwi
Open Access
- 1 March 2020
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 800 (1)
Abstract
Modification of bitumen binders with polymers and nanomaterials has successes in mitigating various major causes of pavement failures. The aluminum oxide nanoparticles (AI2O3) and Acrylate-Styrene-Acrylonhrtilrei polymer (ASA) were poured on the base bitumen binder 60/70 penetration grade with percentages of 3, 5 and 7% by the weight of bitumen binder. The outcome shows that the inclusion of polymer modified binders (ASMBs) and nanoparticles modified binders (ALMBs) matter has a great deal of impact on the rheological behavior of the bitumen binder at intense temperatures. However, the complex shear modulus (G*) improves the mix of the two modifiers. The increment at 75 °C was 63.70% for five percent ASBMs polymer, while for ALMBs, 71.12% for five percent. Although, the modified bitumen binders show high resistivity to rutting in intense temperatures, upon increment to 80% and 59% for five percent concentration of ASMBs as well as ALMBs chronologically. The refinement of bitumen binders gives an increase in the property of the binder which is the creep recovery for approximately about 69.23% and 62.53%. The use of ASMBs and ALMBs as discovered in this study shows that both modifiers above can mitigate the issues of the bitumen binder at intense temperatures, and five percent is regarded as the maximum constituent of the two modifiers.Keywords
This publication has 20 references indexed in Scilit:
- Nanomaterials Applied in Asphalt Modification: A ReviewJournal of Materials Science & Technology, 2013
- How Thermal Fatigue Cycles Change the Rheological Behavior of Polymer Modified Bitumen?Energy Procedia, 2013
- Performance evaluation of linear and nonlinear nanocomposite modified asphaltsConstruction and Building Materials, 2012
- Performance of asphalt binder blended with non-modified and polymer-modified nanoclayConstruction and Building Materials, 2012
- Laboratory evaluation of rutting susceptibility of polymer-modified asphalt mixtures containing recycled pavementsConstruction and Building Materials, 2012
- Preparation and rheological characterization of asphalt binders reinforced with layered silicate nanoparticlesConstruction and Building Materials, 2010
- Rheology and stability of bitumen/EVA blendsEuropean Polymer Journal, 2004
- Thermodynamics, Phase Diagrams, and Stability of Bitumen−Polymer BlendsEnergy & Fuels, 2003
- Evaluation and optimization of the engineering properties of polymer-modified asphaltJournal of Failure Analysis and Prevention, 2002
- Refinement of the Superpave Specification Parameter for Performance Grading of AsphaltJournal of Transportation Engineering, 2001