A Parameter-Free Method for Estimating the Stator Resistance of a Wound Rotor Synchronous Machine
Open Access
- 4 March 2023
- journal article
- research article
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 14 (3) , 65
Abstract
This paper presents a new online method based on low frequency signal injection to estimate the stator resistance of a Wound Rotor Synchronous Machine (WRSM). The proposed estimator provides a parameter-free method for estimating the stator resistance, in which there is no need to know the values of the parameters of the machine model, such as the stator and rotor inductances or the rotor flux linkage. In this method, a low frequency sinusoidal current is injected in the d axis of the stator current to produce a sinusoidal flux in the stator. In this paper, it is shown that the phase difference between the generated sinusoidal flux and the injected sinusoidal current is related to the stator resistance mismatch. Using this phase difference, the stator resistance is estimated. To validate the proposed model-free estimator, simulations were performed with Matlab Simulink and the results were compared with the extended Kalman filter observer. Finally, experimental tests, under different conditions, were performed to estimate the stator resistance of a WRSM.Keywords
This publication has 34 references indexed in Scilit:
- Rotor resistance estimation using Extended Kalman filter and spectral analysis for rotor bar fault diagnosis of sensorless vector control induction motorMeasurement, 2017
- Identification of Flux Linkage Map of Permanent Magnet Synchronous Machines Under Uncertain Circuit Resistance and Inverter NonlinearityIEEE Transactions on Industrial Informatics, 2017
- Initial Rotor Position Detection for Sensorless Interior PMSM With Square-Wave Voltage InjectionIEEE Transactions on Magnetics, 2017
- Sensorless Control of Permanent Magnet Synchronous Machine Based on Second-Order Sliding-Mode Observer With Online Resistance EstimationIEEE Transactions on Industry Applications, 2017
- PMSM Magnetization State Estimation Based on Stator-Reflected PM Resistance Using High-Frequency Signal InjectionIEEE Transactions on Industry Applications, 2015
- Reduced-Order Flux Observers With Stator-Resistance Adaptation for Speed-Sensorless Induction Motor DrivesIEEE Transactions on Power Electronics, 2009
- Online Parameter Estimation and Adaptive Control of Permanent-Magnet Synchronous MachinesIEEE Transactions on Industrial Electronics, 2009
- Signal analysis and identification for induction motor sensorless controlControl Engineering Practice, 2006
- An improved stator flux estimation in steady-state operation for direct torque control of induction machinesIEEE Transactions on Industry Applications, 2002
- An improved stator flux estimation for speed sensorless stator flux orientation control of induction motorsIEEE Transactions on Power Electronics, 2000