Assessment of the stresses produced on the bone implant/tissue interface to the different insertion angulations of the implant - a three-dimensional analysis by the finite elements method
Authors:
Open Access
- 1 January 2020
- journal article
- research article
- Published by Medicina Oral, S.L. in Journal of Clinical and Experimental Dentistry
- Vol. 12 (10) , e930-e937
Abstract
The present study aimed to assess the stresses produced on the surface of the bone tissue around dental implants with three different insertion angulations subjected to axial and oblique loading. The study was created according to the recommendations of the Checklist for Reporting In-vitro Studies (CRIS). The Straumann™ bone level RC (4.1 x 10 mm) implant, Cone Morse connection (CM), RC Straumann Variobase™ with abutment (3.5 mm) was placed in the region of element 16, with the platform positioned at the height of the bone crest. Three assessment models were produced: model M1 or control - implant perpendicular to the bone crest; model M2 - implant angulated at 17° relative to the bone crest; and model M3 - implant angulated at 30° relative to the bone crest. The masticatory loads were simulated with 100 N of intensity and two loading patterns (axial and oblique) were applied to each model. Then, the models were exported to the finite elements simulation software Ansys Workbench V19.2 (Ansys Inc., Canonsburg, PA, USA). To assess the finite elements, qualitative and quantitative analyses were performed. It was observed that, under axial loading, qualitatively, the peaks occurred in the cavosurface region, palatal aspect in M1 and M2, and buccal aspect in M3. Quantitatively, the greatest angulation resulted in a low stress peak. Under oblique loading, qualitatively, the peaks occurred in the cavosurface region, buccal aspect in the three groups. Quantitatively, the greatest angulation of the implant resulted in an increase in stress peaks on the buccal aspect. Under axial loading, the three insertion angulations of the implant - M1, M2, and M3 - were clinically viable. When subjected to oblique loading, the 30° angulation (M3) suggested a significant risk of bone loss and it was contraindicated. Key words:Finite element analysis, dental implants, load support.Keywords
This publication has 22 references indexed in Scilit:
- Influence of lubricant on screw preload and stresses in a finite element model for a dental implantThe Journal of Prosthetic Dentistry, 2014
- Influence of Tapered and External Hexagon Connections on Bone Stresses Around Tilted Dental Implants: Three‐Dimensional Finite Element Method With Statistical AnalysisJournal of Periodontology, 2014
- Finite element analysis of bone–implant biomechanics: refinement through featuring various osseointegration conditionsInternational Journal of Oral and Maxillofacial Surgery, 2012
- Biomechanical effects of two different collar implant structures on stress distribution under cantilever fixed partial denturesActa Odontologica Scandinavica, 2011
- Structure, mechanical properties, and grindability of dental Ti–Zr alloysJournal of Materials Science: Materials in Medicine, 2008
- Factorial analysis of variables influencing mechanical characteristics of a single tooth implant placed in the maxilla using finite element analysis and the statistics‐based Taguchi methodEuropean Journal of Oral Sciences, 2007
- The Staggered Installation of Dental Implants and Its Effect on Bone StressesClinical Implant Dentistry and Related Research, 2007
- Effect of implant design on survival and success rates of titanium oral implants: a 10‐year prospective cohort study of the ITI® Dental Implant SystemClinical Oral Implants Research, 2004
- Finite element analysis of the influence of implant inclination, loading position, and load direction on stress distributionOdontology, 2003
- Mechanical properties of foods responsible for resisting food breakdown in the human mouthArchives of Oral Biology, 1997