Design, Characterization, and Preliminary Assessment of a Two-Degree-of-Freedom Powered Ankle–Foot Prosthesis
Open Access
- 26 January 2024
- journal article
- research article
- Published by MDPI AG in Biomimetics
- Vol. 9 (2) , 76
Abstract
Powered ankle prostheses have been proven to improve the walking economy of people with transtibial amputation. All commercial powered ankle prostheses that are currently available can only perform one-degree-of-freedom motion in a limited range. However, studies have shown that the frontal plane motion during ambulation is associated with balancing. In addition, as more advanced neural interfaces have become available for people with amputation, it is possible to fully recover ankle function by combining neural signals and a robotic ankle. Accordingly, there is a need for a powered ankle prosthesis that can have active control on not only plantarflexion and dorsiflexion but also eversion and inversion. We designed, built, and evaluated a two-degree-of-freedom (2-DoF) powered ankle–foot prosthesis that is untethered and can support level-ground walking. Benchtop tests were conducted to characterize the dynamics of the system. Walking trials were performed with a 77 kg subject that has unilateral transtibial amputation to evaluate system performance under realistic conditions. Benchtop tests demonstrated a step response rise time of less than 50 milliseconds for a torque of 40 N·m on each actuator. The closed-loop torque bandwidth of the actuator is 9.74 Hz. Walking trials demonstrated torque tracking errors (root mean square) of less than 7 N·m. These results suggested that the device can perform adequate torque control and support level-ground walking. This prosthesis can serve as a platform for studying biomechanics related to balance and has the possibility of further recovering the biological function of the ankle–subtalar–foot complex beyond the existing powered ankles.Keywords
All Related Versions
Funding Information
- MIT Media Lab Consortia (R01HD097135)
- the Eunice Kennedy Shriver National Institute of Child Health (R01HD097135)
- Human Development of the National Institutes of Health (R01HD097135)
This publication has 16 references indexed in Scilit:
- Step-to-Step Ankle Inversion/Eversion Torque Modulation Can Reduce Effort Associated with BalanceFrontiers in Neurorobotics, 2017
- FlexSEA: Flexible, Scalable Electronics Architecture for wearable robotic applications2016
- Design and Preliminary Evaluation of a Two DOFs Cable-Driven Ankle–Foot Prosthesis with Active Dorsiflexion–Plantarflexion and Inversion–EversionFrontiers in Bioengineering and Biotechnology, 2016
- Bionic ankle–foot prosthesis normalizes walking gait for persons with leg amputationProceedings Of The Royal Society B-Biological Sciences, 2011
- A multiple-task gait analysis approach: Kinematic, kinetic and EMG reference data for healthy young and adult subjectsGait & Posture, 2011
- Design and Control of a Powered Transfemoral ProsthesisThe International Journal of Robotics Research, 2008
- Powered Ankle-Foot Prosthesis for the Improvement of Amputee Ambulation2018 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2007
- Human balance and posture control during standing and walkingGait & Posture, 1995
- Control of the medial-lateral balance in walkingActa Orthopaedica, 1986
- Impedance Control: An Approach to Manipulation: Part I—TheoryJournal of Dynamic Systems, Measurement, and Control, 1985