Effects of electrospraying parameters on deposition of La 0.3 Sr 0.7 Fe 0.7 Cr 0.3 O 3− δ cathode layer on GDC
- 27 December 2022
- journal article
- research article
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 20 (3) , 1512-1525
Abstract
High performance in intermediate temperature solid oxide fuel cells requires improvements especially in the microstructure of the cathode layer. New cobalt‐free cathode materials are used because cobalt‐containing cathodes have higher thermal expansion coefficients, poor long‐term chemical stability, and lower mechanical stability. Recently cobalt‐free cathodes have been proposed to solve these issues by using deposition methods other than electrospray deposition (ESD). In this study, ESD method is used to develop a cobalt‐free cathode layer. The electrolyte layer is gadolinium‐doped ceria that is deposited with La 0.3 Sr 0.7 Fe 0.7 Cr 0.3 O 3− δ (LSFCr) prepared by 2‐butoxyethanol and ethylene glycol solvents as opposed to conventional solvents. Experimental ESD parameters are tested at different levels and combinations by applying statistical experimental design methods to optimize the microstructure. Coating deposited as such demonstrated higher electrochemical performance than similar electrodes fabricated by other methods.Keywords
This publication has 58 references indexed in Scilit:
- Redox Stability of Ni-YSZ Cermets Prepared by Polymeric Precursor InfiltrationECS Transactions, 2012
- Electrochemical investigation of oxygen reduction reaction on La0.6Sr0.4Co0.2Fe0.8O3−δ cathodes deposited by Electrostatic Spray DepositionJournal of Power Sources, 2012
- Symmetric and reversible solid oxide fuel cellsRSC Advances, 2011
- Performance of (La,Sr)(Co,Fe)O3−x double-layer cathode films for intermediate temperature solid oxide fuel cellJournal of Power Sources, 2011
- Flame spray deposition of La0.6Sr0.4CoO3− thin films: Microstructural characterization, electrochemical performance and degradationJournal of Power Sources, 2010
- Optimized La0.6Sr0.4CoO3–δ Thin‐Film Electrodes with Extremely Fast Oxygen‐Reduction KineticsAdvanced Functional Materials, 2009
- Effects of boron addition and intensive grinding on synthesis of anorthite ceramicsCeramics International, 2008
- Influence of cell voltage and current on sulfur poisoning behavior of solid oxide fuel cellsJournal of Power Sources, 2007
- A symmetrical solid oxide fuel cell demonstrating redox stable perovskite electrodesJournal of Materials Chemistry, 2006
- Structure and electrical properties of La1 − xSrxCo1 − yFeyO3. Part 2. The system La1 − xSrxCo0.2Fe0.8O3Solid State Ionics, 1995