Membrane fouling and removal performance of submerged aerobic membrane bioreactors: a comparative study of optimizing operational conditions and membrane modification
- 1 December 2021
- journal article
- research article
- Published by Wiley in Journal of Chemical Technology & Biotechnology
- Vol. 97 (5) , 1190-1199
Abstract
BACKGROUND: The effects of sludge retention time, organic loading rate, specific aeration demand per membrane area (SADm) and exploiting poly(vinyl chloride)/polycarbonate/modified silver nanoparticles (PVC/PC/MAg) nanocomposite membrane in membrane fouling and removal performance of submerged membrane bioreactors (SMBRs) were compared. A reference membrane bioreactor (R‐SMBR) having a pure PVC/PC hollow fiber membrane module and no operational condition improvement was used as a reference for comparison.RESULTS: The results revealed that all of the parameters had a considerable influence on improving membrane fouling, among which optimizing SADm and installing nanocomposite membranes in the SMBRs had comparable performances. Although the nanocomposite membrane had excellent potential to boost the membrane flux up to 62% in comparison with the R‐SMBR, it did not play any noticeable roles in rectifying the removal efficiency of the SMBR. On the other hand, not only did SADm increase the membrane flux up to 55%, but it also increased about 5% of COD and 3% of NH4+‐N removal.CONCLUSIONS: Sludge characteristics were not affected by membrane modification since the concentration of extracellular polymeric substances, soluble microbial products and mean particle size were 110 ± 1 mg g−1 VSS, 54 ± 1 mg L−1 and 50 μm, respectively, for both the R‐SMBR and the SMBR in which the modified membrane was installed. However, the operational parameters could also modify the treatment performance of the SMBRs by positively impacting on sludge characteristics besides mitigating membrane fouling. © 2021 Society of Chemical Industry (SCI).Keywords
This publication has 47 references indexed in Scilit:
- Analysis of UF membrane fouling mechanisms caused by organic interactions in seawaterWater Research, 2013
- Extracellular polymeric substances (EPS) of microbial aggregates in biological wastewater treatment systems: A reviewBiotechnology Advances, 2010
- Factors affecting the performance of membrane bioreactor for piggery wastewater treatmentBioresource Technology, 2009
- Sequencing versus continuous membrane bioreactors: Effect of substrate to biomass ratio (F/M) on process performanceJournal of Membrane Science, 2008
- A comprehensive study on membrane fouling in submerged membrane bioreactors operated under different aeration intensitiesSeparation and Purification Technology, 2008
- Effects of sludge retention time on membrane fouling and microbial community structure in a membrane bioreactorJournal of Membrane Science, 2007
- The effect of organic loading on process performance and membrane fouling in a submerged membrane bioreactor treating municipal wastewaterWater Research, 2006
- Influence of sludge retention time on membrane fouling and bioactivities in membrane bioreactor systemProcess Biochemistry, 2005
- Sludge characteristics and their contribution to microfiltration in submerged membrane bioreactorsJournal of Membrane Science, 2003
- Membrane Filtration Characteristics in Membrane-Coupled Activated Sludge System: The Effect of Floc Structure on Membrane FoulingSeparation Science and Technology, 1999