Sodium Charge Storage in Thin Films of MnO2Derived by Electrochemical Oxidation of MnO Atomic Layer Deposition Films
Open Access
- 9 October 2015
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 162 (14) , A2753-A2761
Abstract
Sodium charge storage in ultrathin MnO2 films was studied using cyclic voltammetry (CV) and electrochemical quartz crystal microbalance (EQCM) measurements. The MnO2 films were fabricated by electrochemical oxidation of MnO films grown by atomic layer deposition (ALD). CV analysis confirmed that oxidation of MnO to MnO2 involved two moles of electrons per mole of Mn in the MnO ALD film. Scanning electron microscopy (SEM) images revealed that electrochemical oxidation of MnO led to the formation of MnO2 nanosheets. EQCM measurements suggested that Na+ cations participate in charge storage in MnO2. X-ray photoelectron spectroscopy (XPS) experiments measured sodium in MnO2 after both positive/anodic and negative/cathodic voltage sweeps. The stoichiometry was Na0.25MnO2 after negative/cathodic voltage sweeps. Approximately one-half of the sodium was removed after positive/anodic voltage sweeps. The areal capacitance increased progressively with initial MnO ALD film thickness. This increase in areal capacitance is consistent with bulk charge storage in MnO2 or higher surface area of MnO2 nanosheets resulting from larger MnO ALD film thicknesses. Experiments at varying scan rates indicated that charge storage in MnO2 originates from a combination of capacitive and diffusive processes. Bulk charge storage makes a significant contribution to total charge storage in the thicker MnO2 films.Keywords
This publication has 50 references indexed in Scilit:
- Fast Ionic Diffusion-Enabled Nanoflake Electrode by Spontaneous Electrochemical Pre-Intercalation for High-Performance SupercapacitorScientific Reports, 2013
- In situ crystallographic investigations of charge storage mechanisms in MnO2-based electrochemical capacitorsJournal of Power Sources, 2012
- Atomic layer deposition of vanadium oxide on carbon nanotubes for high-power supercapacitor electrodesEnergy & Environmental Science, 2012
- Ordered mesoporous α-MoO3 with iso-oriented nanocrystalline walls for thin-film pseudocapacitorsNature Materials, 2010
- Materials for electrochemical capacitorsNature Materials, 2008
- Synthesis and characterization of tin oxide/carbon aerogel composite electrodes for electrochemical supercapacitorsJournal of Power Sources, 2007
- Synthesis and Electrochemical Characterization of Vanadium Oxide on Carbon Nanotube Film Substrate for Pseudocapacitor ApplicationsJournal of the Electrochemical Society, 2006
- The role of cations of the electrolyte for the pseudocapacitive behavior of metal oxide electrodes, MnO2 and RuO2Electrochimica Acta, 2004
- “Inner” and “outer” active surface of RuO2 electrodesElectrochimica Acta, 1990
- Reversibility and Growth Behavior of Surface Oxide Films at Ruthenium ElectrodesJournal of the Electrochemical Society, 1978