Effect of alkaline treatment on physical, mechanical, and thermal characteristics of jute filler reinforced epoxy composites
Authors:
- 12 November 2022
- journal article
- research article
- Published by Wiley in Journal of Vinyl and Additive Technology
- Vol. 29 (2) , 330-342
Abstract
With burgeoning environmental concerns worldwide, using natural fibers/fillers to produce composites rather than conventional fibers is on the rise. The current work focuses on the physical and thermomechanical characteristics of alkaline‐treated jute filler‐based epoxy composites. The composites have been prepared with different weight fraction of jute fillers (0%, 2.5%, 5%, 7.5%, 10%, and 12.5%) using hand layup process. The X‐ray diffraction and Fourier transform infrared spectroscopy analysis observed that the alkali treatment of jute fillers improved the crystallinity and molecular structure, enhancing the interfacial and molecular bond between fillers and matrix. The mechanical characterizations of developed composites analyzed that the inclusion of treated jute fillers strengthened the tensile and flexural properties. The 5% filler‐based composites have demonstrated maximum tensile strength (54.06 MPa) and modulus (3.12 GPa) with maximum flexural strength (67.55 MPa) and modulus (3.90 GPa). The viscoelastic characteristics of composites revealed that the 7.5% filler‐based composite has the highest storage modulus (3.75 GPa), loss modulus (0.496 GPa), and glass transition temperature (91°C) due to greater interfacial interactions of molecules. The weight loss and degradation of composites analyzed with thermogravimetric analysis, and observed better thermal stability with treated jute fillers. The morphological analysis at fracture surfaces analyzed the brittle catastrophic failure of composites. Therefore, the finding produced better specific strength and stiffness with greater thermal stability for electronics equipment, packaging, and transportation.Keywords
This publication has 41 references indexed in Scilit:
- Jute fiber reinforced epoxy composites and comparison with the glass and neat epoxy compositesJournal of Composite Materials, 2013
- Jute fiber reinforced polypropylene composite: effect of chemical treatment by benzenediazonium salt in neutral mediumJournal of Reinforced Plastics and Composites, 2010
- The Mechanical Properties of γ-Methacryloxypropyltrimethoxy silane-treated Jute/Polyester CompositesJournal of Composite Materials, 2010
- Experimental characterization of woven jute‐fabric‐reinforced isothalic polyester compositesJournal of Applied Polymer Science, 2007
- Physical and mechanical characterization of jute fabric compositesJournal of Applied Polymer Science, 2005
- Dynamic mechanical analysis of banana fiber reinforced polyester compositesComposites Science and Technology, 2003
- Dynamic mechanical and thermal analysis of vinylester-resin-matrix composites reinforced with untreated and alkali-treated jute fibresComposites Science and Technology, 2002
- The effect of fiber treatment on the mechanical properties of unidirectional sisal-reinforced epoxy compositesComposites Science and Technology, 2001
- Biofibres, biodegradable polymers and biocomposites: An overviewMacromolecular Materials and Engineering, 2000
- Low Cost, High Strength, Hard Cellulosic Fiber Reinforced Polyester Structures and UnitsPolymer-Plastics Technology and Engineering, 1985